NX Solenoid Frequency w/FJO Progressive Controller?
09-26-2007, 05:36 PM
#1
Staging Lane
Thread Starter
Join Date: May 2006
Location: Detroit, MI ... yes Detroit
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
NX Solenoid Frequency w/FJO Progressive Controller? Does anyone know what the optimal frequency for NX solenoid activation is using a FJO Mini Progressive Controller?
User Manual states: "Solenoid Frequency is the rate at which the controller cycles the solenoids. This number is
determined by the solenoid manufacturer. [14 will work with all solenoids but may not be the optimum
frequency]"
I currently have it set to default of 14, just wondering if this should be a different value or not???
User Manual states: "Solenoid Frequency is the rate at which the controller cycles the solenoids. This number is
determined by the solenoid manufacturer. [14 will work with all solenoids but may not be the optimum
frequency]"
I currently have it set to default of 14, just wondering if this should be a different value or not???
Trending Topics
09-28-2007, 07:04 AM
#8
TECH Fanatic
iTrader: (10)
Join Date: Aug 2002
Location: Danville,PA
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
Here's an old thread that is hard to find. I bookmarked it:
https://ls1tech.com/forums/showthrea...=FJO+frequency
https://ls1tech.com/forums/showthrea...=FJO+frequency
10-15-2007, 06:53 PM
#9
TECH Addict
iTrader: (3)
Join Date: Aug 2003
Location: IL
Posts: 2,561
Likes: 0
Received 0 Likes
on
0 Posts
Using 15hz for N2O outlet and TNT solenoids now and seems to be working fine.
Are both of these solenoids made by peter paul? I remember reading that most solenoids come from two or three manufacturers.
Are both of these solenoids made by peter paul? I remember reading that most solenoids come from two or three manufacturers.
