Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

scared to spray

Thread Tools
 
Search this Thread
 
Old Oct 31, 2007 | 08:55 PM
  #1  
chevy0128's Avatar
Thread Starter
Launching!
 
Joined: Oct 2007
Posts: 236
Likes: 0
Default scared to spray

well every time i brought it up my friends say i will blow my engine using nitrous even though they know nothing about it...but i couldnt resist the 100hp at the flick of a button soo i went ahead and ordered the tntf1 kit,window swith,FPSS,and purge and am having it installed on friday. I drive an a4 01 z28 with just a few bolt ons..so if i do end up blowing something up or screwing something up what would it most likeley be ? any safety precautions i should take?
Reply
Old Oct 31, 2007 | 09:03 PM
  #2  
jmill96Z's Avatar
10 Second Club
iTrader: (3)
 
Joined: Feb 2006
Posts: 2,554
Likes: 1
From: Movin' On Up
Default

You're gonna crack the welds on the intake manifold for sure
Reply
Old Oct 31, 2007 | 09:05 PM
  #3  
chevy0128's Avatar
Thread Starter
Launching!
 
Joined: Oct 2007
Posts: 236
Likes: 0
Default

and im guessing thats just the start?
Reply
Old Oct 31, 2007 | 09:05 PM
  #4  
chevy0128's Avatar
Thread Starter
Launching!
 
Joined: Oct 2007
Posts: 236
Likes: 0
Default

any safety precautions i could take
?
Reply
Old Oct 31, 2007 | 09:26 PM
  #5  
caMnaro's Avatar
TECH Regular
15 Year Member
iTrader: (24)
 
Joined: Sep 2006
Posts: 405
Likes: 1
Default

dont spray before 3000 rpm, dont spray threw the shifts if its a stock trans,new set of tires. and have fun
Reply
Old Oct 31, 2007 | 10:02 PM
  #6  
Cliff's Avatar
TECH Enthusiast
iTrader: (19)
 
Joined: Dec 2001
Posts: 623
Likes: 0
From: deam land
Default

Originally Posted by caMnaro
dont spray before 3000 rpm, dont spray threw the shifts if its a stock trans,new set of tires. and have fun
Agree 100%.
Reply
Old Oct 31, 2007 | 10:15 PM
  #7  
95 Z28's Avatar
12 Second Club
iTrader: (21)
 
Joined: Apr 2006
Posts: 1,406
Likes: 0
From: West Seneca, NY
Default

First off, your friends are obviously ******* idiots when it comes to cars. Get yourself a set of NGKTR6 or Autolite103 plugs if you haven't already. Set up your kit, triple check your wiring, make sure all your noids are working properly, as well as your window switch. I'd suggest either hooking up with a wideband to make sure you're not spiking or running out of fuel up top (well, anywhere in the curve actually), or getting to a dyno which will also use a wideband. And you'll need a new set of tires
Reply
Old Oct 31, 2007 | 10:20 PM
  #8  
jake2582's Avatar
Teching In
 
Joined: Oct 2007
Posts: 11
Likes: 0
From: west ga
Default

spray the bioch!
whats the worst that can happen?
break your car (which will 99.9% NOT happen on a 100 kit)
it aint like you'll die
the way i see it is, i can never break anything that cant be fixed.
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-1

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-2

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-3

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-4

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-5

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-6

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
story-7

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

 Verdad Gallardo
story-8

10 Camaros You Should Never Buy

 
story-9

10 LS Engine Myths That Refuse to Die

 Verdad Gallardo
Old Oct 31, 2007 | 10:31 PM
  #9  
G Alex's Avatar
Registered User
 
Joined: Oct 2007
Posts: 14
Likes: 0
From: louisville
Default

100 shot on your car shouldnt be a problem at all. I can remember doing 150 hits on a stock 5 liter motor with stock injectors and stock pump. A LOT of your peeps probably have absolutely no idea what nitrous is, nor what it does, nor what they are talking about. I remember when I first sprayed my car, it was a little nerve racking but after the first or second shot, it was over. I think a lot of guys have heard stories from the past when guys were drilling out jets and overdoing it by lots. Ask anyone about 100 shot and you will get the same response, no problems.... spray it. You can put a wideband on it but at 100 shot , personally I wouldnt sweat it. I ran over 200 bottles through my 5 liter and had a backfire once, because I hit switch before 3 thousand rpm. It was my fault and never happened again. I never had a wideband on it and the motor was still running well after 200+ bottles on it . Good luck with everything.
Reply
Old Oct 31, 2007 | 10:35 PM
  #10  
G Alex's Avatar
Registered User
 
Joined: Oct 2007
Posts: 14
Likes: 0
From: louisville
Default

Originally Posted by chevy0128
and im guessing thats just the start?
Jmill96z was just kidding. You dont have to worry about the welds on your intake manifold. Just a joke....., good one but just a joke.
Reply
Old Oct 31, 2007 | 10:40 PM
  #11  
jake2582's Avatar
Teching In
 
Joined: Oct 2007
Posts: 11
Likes: 0
From: west ga
Default

Originally Posted by chevy0128
and im guessing thats just the start?
its a famous line from the most technicaly accurate movie of all time
FAST AND THE ****
Reply
Old Oct 31, 2007 | 11:13 PM
  #12  
BayAreaSS's Avatar
TECH Veteran
iTrader: (10)
 
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Default

I have to deal with people telling me my motor is going to blow all the time. Most people dont know **** about nitrous, Just what they have seen on fast and furious. That movie gave nitrous a bad rep.

I installed the spray anyway and did my own thing. I have a 100 shot and i sprayed it for the first time a few nights ago and its great.
Reply
Old Nov 1, 2007 | 01:09 AM
  #13  
chevy0128's Avatar
Thread Starter
Launching!
 
Joined: Oct 2007
Posts: 236
Likes: 0
Default

that is exactly what i say nitrous just has a bad rep...my friends who tell me this drive a neon****(i hate those damn things) and a turbo bmw325is(spent 15k to turbo it)..and both of them canot even take my stock ls1 i love it. i cant wait for 100 more horses even more cars like theirs to beet.
Reply
Old Nov 1, 2007 | 01:27 AM
  #14  
ChaseSS's Avatar
TECH Fanatic
iTrader: (17)
 
Joined: Jun 2004
Posts: 1,373
Likes: 0
From: St. Louis
Default

FPSS, TPS switch, and a window switch will make it safe .... are you a M6 or auto?
Reply
Old Nov 1, 2007 | 01:31 AM
  #15  
chevy0128's Avatar
Thread Starter
Launching!
 
Joined: Oct 2007
Posts: 236
Likes: 0
Default

auto a4 ...is there a disadvantage or advantage to this
Reply
Old Nov 1, 2007 | 02:21 AM
  #16  
crazboy99's Avatar
TECH Enthusiast
 
Joined: Dec 2006
Posts: 564
Likes: 1
From: Powder Springs, GA
Default

im going to venture to say that the first thing that will break is the stock rearend...being stock or close to it, i would agree with the pilling it over 3000 rpms and letting off around 5800 (mostly depends on where redline is at for you)...im not an expert by any means...so it would probably be better to take the advice of the more experianced
Reply
Old Nov 1, 2007 | 02:48 AM
  #17  
01_ram-air's Avatar
10 Second Club
iTrader: (3)
 
Joined: Jul 2005
Posts: 1,245
Likes: 2
From: Valrico, FL
Default

Get yourself a bottle heater. Very important. You have to make sure that you're spraying at the correct pressure. I'd say test your car at different pressures and see what works best. IMO, you want to stay around 1050-1100 psi. I usually run my kit at 1150-1200. I'm not sure what kind of noids come with that kit, but I wouldn't run that high psi with the small noids. I started out with a 75 shot. That lasted until the next time I went to the track when I went up to a 100 shot. I ran that for about a year. Now, I've moved up to a 150 shot. I would also recommend to put the car on a dyno to check your a/f ratios. But, you don't have to. TR6s gapped at .035. Spray away and have fun.
Reply
Old Nov 1, 2007 | 06:37 AM
  #18  
bjamick's Avatar
TECH Veteran
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (31)
 
Joined: May 2006
Posts: 4,218
Likes: 3
From: Birmingham AL.
Default

Ya i remember when i hooked up my 100 wet shot for the first time. I didnt get no FPSS or WOT switch or any other BS like that. I hooked it up to red button that was hidden in my ash tray. When i want the power i just hit the button, been doing it that way for years.
Reply
Old Nov 1, 2007 | 06:02 PM
  #19  
quickblade's Avatar
12 Second Club
 
Joined: Aug 2007
Posts: 508
Likes: 0
From: Rowlett
Default

I am pretty new at spraying and I am loving it..
I started out with the 50 shot.. Made a pass...
Went back and put the 75 shot in... made a pass.
and then was going to put 100 shot in then decided not too...
I then found out why my car was running and loving the N2O... I had a small tune on the car.
So I went to a 150 dry shot.. WOW.. it works no problem... I am still rich as hell, so some adjusting needs to be done, but WOW....

150 dry, and now its time to tune that in and down.... Plus some other additions,

But you will be great on 100 shot..... no problems... And dont listen to your buddies, if you have a 01z28..........
Reply
Old Nov 1, 2007 | 06:29 PM
  #20  
SSmoken's Avatar
11 Second Club
iTrader: (26)
 
Joined: Oct 2006
Posts: 2,140
Likes: 0
From: S.W. Missouri
Default

tht f1's are good kits. i like mine alot. after i got mine put on i went and threw on the dr's and let'r rip. you wont be dissapointed with a 100 shot. dont listen to your friends, just laugh after you wax them lol. good luck and have fun.
Reply



All times are GMT -5. The time now is 08:14 PM.

story-0
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-1
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-2
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-3
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-4
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-5
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-6
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE
story-7
Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Slideshow: A heavily reworked 1972 K5 Blazer swaps its off-road roots for a low-slung street-focused build with modern V8 power.

By Verdad Gallardo | 2026-03-09 18:08:45


VIEW MORE
story-8
10 Camaros You Should Never Buy

Slideshow: There are thousands of used Camaros on the market but we think you should avoid these 10

By | 2026-02-17 17:09:30


VIEW MORE
story-9
10 LS Engine Myths That Refuse to Die

Slideshows: Which one of these myths do you believe?

By Verdad Gallardo | 2026-01-28 18:10:11


VIEW MORE