Urgent Help ?
Thread Starter
TECH Resident
iTrader: (22)
Joined: Oct 2006
Posts: 910
Likes: 0
From: Shreveport, Louisiana
I have heads, cam, and nitrous to my 02 vette. It runs good when I am not spraying besides the fact that it surges and bucks because its not a good tune. I just had it dyno tuned at LG Motorsports about a month or so ago. When I went to spray a 125 shot, it kicks in and out and i believe this is due to the FPSS doing its job cuz its not getting enough fuel. BUT, it also makes a horrible sounding CLICKING noise. The best way to describe it is like the kids that close pin a baseball card to thier bike spokes and it clicks fast and loud. Thats what it sounds like. So tonight I put the jets for a 100 shot in, It doesnt kick in a out anymore but it still makes the loud and fast clicking noise??? It doesnt seem to be as loud as it was with the 125 shot but its hard to tell. Any ideas????? It didnt do this on the dyno and it was dynoed with a 100 shot. Note, the heads are AFR 205 59cc heads with the STOCK GM MLS headgasket so It should have plenty of PTV clearance, right ??? Thanks for the help guys.
Chris
Chris
just tossin ideas, but maybe a bad soleniod, ensure your jetting is correct, what is your a/f ratio - maybe lean it out, is your bottle pressure correct, is the bottle full, angled correctly, plugs. has it always done this?
Thread Starter
TECH Resident
iTrader: (22)
Joined: Oct 2006
Posts: 910
Likes: 0
From: Shreveport, Louisiana
make sure your fuel selnoid is still working and check for exhaust leaks you might be hearing it when spraying because your making that much more power. a header leak can sound like a click or snapping noise
Trending Topics
Thread Starter
TECH Resident
iTrader: (22)
Joined: Oct 2006
Posts: 910
Likes: 0
From: Shreveport, Louisiana
I know what header leaks sound like and its not that





