have a c6 thats in the shop right now getting some finishing touches put on it. Looking to add 2 bottles to the rear of both my seats on the divider. Either two 10lbers or two 5lbers, which ever fits best. Just looking for a 100 dry shot with all the saftey equipment. Also need a purge that that will be capable of purging on both sides of the vehicle. Right now since a show is coming up i was thinking 3 purge exits on each side( i know a lil ricey, but people eat that **** up at shows). If anyone can help me that be great. Thanks in advance IceN.

 

what exactly is your question? seems like you know what you want. were you wondering what else to purchase with the system, or exactly what would you need to run 3 purge exits?

 

what parts would i need to purchase precisely. Also the purges get me kinda confused. How many purge noids would i need to purge through 3 exits on each side. Ive tried to keep up with all they saftey stuff, and i know that your company has come up with a new interface. What would i need to keep it safe.

 

you would only need one purge solenoid and you would basically run a distribution block that splits the lines three ways. You would want a bottle heater to maintain sufficient bottle pressure. You could get two if you wanted, or simply shut off one bottle and heat the other. A window switch is great to have so the spray isnt coming on before 3000 rpm, longates the life of your drive train, and can save your motor if you miss a shift. The interface would help you as well since you could put the nozzle in any location you wanted or go with a nice clean plate. The interface will allow you to make A/F adjustments and pull timing if needed. Definitley need some TR6's as well

 

just wanted to say thank you for all your help. I placed my order with your company earlier today. Thanks again, icen.

 

no problem. im always around if you have anymore questions or need some help with the install

 

So you are suggesting he return the kit he just purchased and sit around and hope to win one in a raffle??? GREAT tech advice, thank you. You do realize this doesnt increase your chance of winning so could you please stop posting it all over the nitrous section.

Everyone is aware of the giveaways, so why dont you have a little more respect for the ls1TECH community and keep it in the original thread.

 

Hopefully when I get ready to get all my Nitrous equipment, one of you nitrous shops can help me to keep it safe. Really cant go wrong with any of the nitrous sponsors on the board, and all of them have some great products .. Keep up the great work HSW.

 

Here's the Vette n2o pic thread, might give you some ideas, and don't be afraid to add yours when done.
https://ls1tech.com/forums/nitrous-oxide/512363-z06-nitrous-guys-come-c5-s.html
Robert