For this T fitting, is one side for the purge, on for a N20 gauge on the A pillar, and one for the main fitting? I'm just trying to make sure about this.

Where did you mount the micro switch and the relays?

 

I mounted the WOT Microswitch off of the lower pass. side bolt of the Throttle Body. I did have to bend the bracket to fit but it works great now. I mounted the System Relay and the Purge Relay on the Pass. fender right behind the Battery. Good luck and take your time with the wiring and do it clean the first time it will pay off later.......

 

anyone on the T fitting?

 

yes on the t fitting, purge and gauge. or a sec stage

 

I mounted both my relays under the dash by the heater box.

 

Where did you find that homemade tunnel mount and how much did it run you? Looks cool and probably was cheap!!!

 

Thanks for the complement, i sent you a PM.

 

I was actually going to point out the T-Fitting left open, but yeah ones for purge and the other a gauge inside the car.
-Joel