Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

got to race my car today

Old Apr 19, 2008 | 06:59 PM
  #1  
Noyzee's Avatar
Thread Starter
8 second mod
iTrader: (37)
 
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Thumbs up got to race my car today

first pass off the trailer 9.98 @137 na best all motor bass to date untill i did a little tuning. went 9.8 @ 138
then went a 9.79 @ 139
then the best NA pass was a
9.74 @ 141+

car picked up almost 3 tenths and 6 mph with the new stuff. keep in mind that with a tune we did in my driveway. car has yet to see a dyno.

the we decided to put the spray to it.
put the 100 jets in it bottle pressure was way low, but i was running out of time. i screwed up the launch as well. when i went to punch it on the trans brake, i hit the shifter forward so i red lit and left some what in 2nd gear. pulled it back fast, but still didnt get the converter where i needs there for killing the 60'
but still went a 1.36 and that was with my base line set ups with all the weight removed from the rear and added to the front.
ended up running.

9.0 @ 148+ with the 100 shot first run out.

pretty sure she has a 8.8-8.9 on 100 shot with a couple more passes

best the car went last year on the 100 shot was 9.3 @143 or 144
so she picked up about 3 tenths with the new heads and headers.
car was just under 3300 pounds with me in it no bottle. with the extra 25 pounds of bottle it was a tad over 3300 pounds.

car felt good tho for sure. very happy with it have a few things to finish up, need new tires and i'll be back out
Reply
Old Apr 19, 2008 | 07:13 PM
  #2  
Robert56's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 9,557
Likes: 1
From: Tacoma, WA
Default

Very good. Man don't you hate that running out of time when you know you have a quicker pass at hand, damn. 8.xx next time out or bust.
Robert
Reply
Old Apr 19, 2008 | 07:14 PM
  #3  
Noyzee's Avatar
Thread Starter
8 second mod
iTrader: (37)
 
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Default

i was very happy with the car. went almost as fast with the 100 shot this year as it did with the 200 shot last year. so im sure with some time it will go 8's with 100 shot
Reply
Old Apr 19, 2008 | 07:59 PM
  #4  
matt94z's Avatar
11 Second Club
20 Year Member
Photogenic
iTrader: (49)
 
Joined: Jan 2005
Posts: 1,475
Likes: 1
From: Munfordville KY
Default

That's smokin man!
Reply
Old Apr 19, 2008 | 09:09 PM
  #5  
jmill96Z's Avatar
10 Second Club
iTrader: (3)
 
Joined: Feb 2006
Posts: 2,554
Likes: 1
From: Movin' On Up
Default

Damn!!!!!!
Reply
Old Apr 19, 2008 | 09:19 PM
  #6  
venom ws7's Avatar
11 Second Club
20 Year Member
iTrader: (13)
 
Joined: Jul 2003
Posts: 5,965
Likes: 1
From: EARTH
Default

Awesome times man Congrats 8s with 100shot will be amazing.
Reply
Old Apr 19, 2008 | 10:56 PM
  #7  
98Z28CobraKiller's Avatar
Restricted User
iTrader: (17)
 
Joined: Nov 2005
Posts: 5,783
Likes: 5
From: WPB, FL
Default

What exactly did you change? From what head and header did you switch from and too?
Reply
Old Apr 20, 2008 | 10:27 AM
  #8  
860 Performance's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2004
Posts: 1,644
Likes: 0
From: Southern NH
Default

Nice Brad! I wish I could have went, but it was a busy day between Home Depot, and Bed ,Bath and Beyond, I just didn't have the time.

How did the fuel cell work out?
Reply
Old Apr 20, 2008 | 11:50 AM
  #9  
Noyzee's Avatar
Thread Starter
8 second mod
iTrader: (37)
 
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Default

thanks guys. im very happy. i have a few other changes im going to do see if i can get the car to run 9.5's on motor and see what she will do on 100 shot. then hit it with 200 or 250.

anyone looking for a powerglide tranny let me know. mine is for sale.

98, i had AFR 225 and kooks 1 7/8 to 2" headers.
i went to a Trick flow head Done up By TEA they are a 245 head all done up real nice and i went to a full 2" kooks header

vinny, i saw you called, but it was to late to call you back. fuel cell was great and looks sweet!!
Reply
Old Apr 20, 2008 | 01:49 PM
  #10  
ls1408cp's Avatar
10 Second Club
iTrader: (37)
 
Joined: Aug 2005
Posts: 1,778
Likes: 0
Default

wow thats fast for a 100shot
Reply
Old Apr 20, 2008 | 03:55 PM
  #11  
BCNUL8R's Avatar
10 Second Club
20 Year Member
Community Builder
Liked
Community Favorite
iTrader: (2)
 
Joined: Jun 2005
Posts: 2,264
Likes: 669
From: Oskaloosa, Iowa
Default

Congrats!!! Always good to run good the first time out for the season and still know there is room for improvement. Very nice for the 100 shot
Reply
Old Apr 20, 2008 | 11:11 PM
  #12  
Noyzee's Avatar
Thread Starter
8 second mod
iTrader: (37)
 
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Default

thanks man
Reply
Old Apr 21, 2008 | 07:53 AM
  #13  
Shoulder Shaker's Avatar
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 377
Likes: 0
From: Wayne, MI
Default

Hey Noyzee that's flying for a 100 shot. I will give you a call later today. Congrats on the new set up and times.
Reply
Old Apr 21, 2008 | 09:16 AM
  #14  
MUSTANGBRKR02's Avatar
12 Second Club
iTrader: (91)
 
Joined: Aug 2006
Posts: 4,599
Likes: 5
From: Maine
Default

Congrats, That thing is moving. Should be a killer on a 200-250 shot!!
Reply
Old Apr 21, 2008 | 12:31 PM
  #15  
Noyzee's Avatar
Thread Starter
8 second mod
iTrader: (37)
 
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Default

Originally Posted by Shoulder Shaker
Hey Noyzee that's flying for a 100 shot. I will give you a call later today. Congrats on the new set up and times.
thanks man, im pretty happy, thats for sure
Reply
Old Apr 22, 2008 | 09:47 PM
  #16  
next's Avatar
TECH Junkie
iTrader: (9)
 
Joined: Jun 2003
Posts: 3,428
Likes: 0
From: Winter Garden, Florida
Default

Great run Brad but you might want to find out how much that is really flowing. 100 shot gaining 7 1/2 tenths in the 9s doesn't add up.
Reply
Old Apr 22, 2008 | 11:52 PM
  #17  
Noyzee's Avatar
Thread Starter
8 second mod
iTrader: (37)
 
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Default

Originally Posted by next
Great run Brad but you might want to find out how much that is really flowing. 100 shot gaining 7 1/2 tenths in the 9s doesn't add up.
same jets i used last year as NX's 100 shot. i will get the numbers but im i think it was 2 47 jets and 2 32 jets. id have to check nx's chart tho. ps, the car was in the 12.0-10.5 AF range as well with onlu 900 bottle pressure
Reply
Old Apr 22, 2008 | 11:52 PM
  #18  
Noyzee's Avatar
Thread Starter
8 second mod
iTrader: (37)
 
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Default

ps.. with a notrous converter!!
Reply
Old Apr 23, 2008 | 07:46 AM
  #19  
ATVracr's Avatar
9 Second Club
iTrader: (5)
 
Joined: Mar 2004
Posts: 5,297
Likes: 1
From: GB
Default

A Nitrous jet size of .047" or 1.1938mm should produce:
199.52 HP with 2 port(s)

Actual HP to the wheels: 169.59 HP
Reply
Old Apr 23, 2008 | 08:09 AM
  #20  
Noyzee's Avatar
Thread Starter
8 second mod
iTrader: (37)
 
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Default

i will have to look up the jet size. i forget what it is. its on the NX chart that came with my plate kit. on there slip its the 100 shot. i forget maybe the 200 shot was the 47 jets. i'll look when i get home.
either way its the same jetting as i ran the 100 shot last year and went a best of 9.3 @ 142-144

so to go from 9.99 @ 135 to 9.74 @ 141 then last year hit it with 100 and it went 9.3 @ 143 (i think it was) to a 9.0 its legit. i forget what jets numbers i had in there, but i know its what NX claims to be the 100 shot. i didnt put the 200 in there because i didnt have the wheelie bars yet.

maybe Nitro Dave can jump in here and fill me in on what the jetting is? i thought it was 47 32 maybe it was 42 37 pretty sure there 200 shot is a 52 47 but again, i dont have the sheet infront of me. i forget
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:56 PM.