tuning dry
Yup as Matt said above...Just use the interface and you won't have to worry about tuning. You can pull timing and add fuel with it. The only thing you'll need to know is how much playing room you have with the injectors in the car now. Any questions let me know. Thanks!
Nick
Nick
On The Tree
iTrader: (11)
Joined: Jun 2005
Posts: 140
Likes: 0
From: Left Texas, now in Camarillo, CA
You will still need to verify airfuel.... and make sure the unit is pulling timing and adding fuel properly. Do not just put it on and go.
Dave
Dave
Trending Topics
give us a call and we can setup you up with either a single nozzle or our dry plate with the interface. as nick said earlier you will not have to retune the car. If you have a wideband thats great, if not get a few wideband dyno pulls done and use the interface to dial in a perfect A/F ratio
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
