LT1 ported heads,msd opti, 4000 BTE stall.....
10-19-2008 | 11:42 PM
#1
Thread Starter
LT1 ported heads,msd opti, 4000 BTE stall..... HEADS:
TEA FULLY cnc'd /E.B.porting massaged LT1 castings. These heads made 430 to the tire on pump gas, Comp hyd roller and stock tuned pcm! The cam was a little bigger than a 306. They will come with comp 954 springs(with titanium retainers) set up for a solid roller, and a set of Crane dual springs with titanium retainers for a hyd.roller set up. Both are good for over .600 lift. Heads also have Ferrea 2.00/1.57 extreme duty valves, with7/16 rocker studs. They were milled 25 thousandths which makes the combustion chambers 52cc. An intake will be included with the heads as I had it machined to fit the milled heads.Intake has been port matched and bored to 58mm on the T/B plate. These things flow more than a set of cnc'd AFR 195's!! PRICE DROP!!! first $1200 GETS THEM
OPTI:
MSD opti with less than 500 miles on it. Works perfectly and is a huge difference than a stocker. I will include a set of MSD 8.5mm wires with the opti. SOLD!!!!
STALL:
BTE 4000 9in. race converter for a TH400. I paid $950 brand new. Gave me a heart pounding 1.40 60 ft! see vid in sig. Less than 500 miles on converter SOLD!!!!!
Valve covers: SOLD!!
LT4 composite valve covers with hardware. Look brand new. They helped me gain 20 rwhp on the dyno! The stock covers were sending the roller rocker/valvetrain noise down to the knock sensor and the PCM pulled over 7 degrees of timing before I put these composite LT4 covers on. Paid 300 for all of it. $200 takes them!
Also have a set of Harland Sharp 1.5 ratio rockers with less than 500 miles on them. $150
And a set of Comp 1.6 PRO Magnum rockers for SOLD!!!. All rockers come with poly locks and are for 7/16 studs.
I'm in the middle of an an LS1 set up and need to move these parts to fund completion of swap. Any questions feel free to call me at 225-719-0215. My name is Todd
TEA FULLY cnc'd /E.B.porting massaged LT1 castings. These heads made 430 to the tire on pump gas, Comp hyd roller and stock tuned pcm! The cam was a little bigger than a 306. They will come with comp 954 springs(with titanium retainers) set up for a solid roller, and a set of Crane dual springs with titanium retainers for a hyd.roller set up. Both are good for over .600 lift. Heads also have Ferrea 2.00/1.57 extreme duty valves, with7/16 rocker studs. They were milled 25 thousandths which makes the combustion chambers 52cc. An intake will be included with the heads as I had it machined to fit the milled heads.Intake has been port matched and bored to 58mm on the T/B plate. These things flow more than a set of cnc'd AFR 195's!! PRICE DROP!!! first $1200 GETS THEM
OPTI:
MSD opti with less than 500 miles on it. Works perfectly and is a huge difference than a stocker. I will include a set of MSD 8.5mm wires with the opti. SOLD!!!!
STALL:
BTE 4000 9in. race converter for a TH400. I paid $950 brand new. Gave me a heart pounding 1.40 60 ft! see vid in sig. Less than 500 miles on converter SOLD!!!!!
Valve covers: SOLD!!
LT4 composite valve covers with hardware. Look brand new. They helped me gain 20 rwhp on the dyno! The stock covers were sending the roller rocker/valvetrain noise down to the knock sensor and the PCM pulled over 7 degrees of timing before I put these composite LT4 covers on. Paid 300 for all of it. $200 takes them!
Also have a set of Harland Sharp 1.5 ratio rockers with less than 500 miles on them. $150
And a set of Comp 1.6 PRO Magnum rockers for SOLD!!!. All rockers come with poly locks and are for 7/16 studs.
I'm in the middle of an an LS1 set up and need to move these parts to fund completion of swap. Any questions feel free to call me at 225-719-0215. My name is Todd
Last edited by SILVERBIRD97; 11-07-2008 at 10:03 AM. Reason: sold item
Trending Topics
10-25-2008 | 10:36 AM
#10
Thread Starter
pics of harlan sharp rockers and opti
http://memimage.cardomain.com/member...jpg?162708-299
http://memimage.cardomain.com/member...jpg?162708-299
http://memimage.cardomain.com/member...jpg?162708-299
http://memimage.cardomain.com/member...jpg?162708-299
http://memimage.cardomain.com/member...jpg?162708-299
http://memimage.cardomain.com/member...jpg?162708-299
10-26-2008 | 10:17 PM
#14
Thread Starter
11.38@121mph with a tall nitrous gear(3.90) on a 28 in tall tire. 4.11's and a 26 in tall tire would have prob been good for a 11.10 to 11.0 pass.
10-31-2008 | 12:40 PM
#17
Thread Starter
MSD opti sold!!
Need to move these heads! For the money, you will not beat the performance from another head. People say" well you can buy trickflows for close to that price" Their combustion chambers are big and they are not CNC'd with tit. retainers and comp or crane double springs with Ferra extreme duty stainless valves, not to mention touched by the LT1 GOD Eric Bradby. These are NOT stock junk. It's just finding the right people who know what they are. I have already proven what they will do. Throw be a bone here fellas!!My LS1 is screaming"finish me!"
Need to move these heads! For the money, you will not beat the performance from another head. People say" well you can buy trickflows for close to that price" Their combustion chambers are big and they are not CNC'd with tit. retainers and comp or crane double springs with Ferra extreme duty stainless valves, not to mention touched by the LT1 GOD Eric Bradby. These are NOT stock junk. It's just finding the right people who know what they are. I have already proven what they will do. Throw be a bone here fellas!!My LS1 is screaming"finish me!"
