Lt4
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Jul 2004
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Lt4
This combo ran a best of 7.28 N/A at 94.1 MPH with a turbo 350 and 7.8 N/A with a 6-speed and 7.48 on a 50 shot.
What i got
30LB accel injectors $200
Fuel rails and adj. fuel regulator $80 sold
LT4 intake port matched for heads and TB. Intake has had some port work don to it. $400 SOLD
Custon grind hydro roller cam, lifter and harded pushrods used with cam spec below $350 sold
Intake 236@.050; 344 lobe rise w/1.6 r.r. .550 Lift
Exhuast 245@.050; .358 lobe risew/1.6 r.r. 573 Lift
LT4 heads that have been ported and polshed $1500
Specs are
2.02 intake and 1.60 exhuast vavle
59cc; bronze guides, hardened spring pads and valve gudies plates
Flow numbers are
Lift Intake Exhuast
.300 192 162
.400 225 187
.500 259 203
.550 276 208
.600 283 213
LT1 edit OBD II for 300.
all prices are wiht out shipping and OBO pm me for pics and any info you moght need. also If you have any questions my number is 325-864-1653
What i got
30LB accel injectors $200
Fuel rails and adj. fuel regulator $80 sold
LT4 intake port matched for heads and TB. Intake has had some port work don to it. $400 SOLD
Custon grind hydro roller cam, lifter and harded pushrods used with cam spec below $350 sold
Intake 236@.050; 344 lobe rise w/1.6 r.r. .550 Lift
Exhuast 245@.050; .358 lobe risew/1.6 r.r. 573 Lift
LT4 heads that have been ported and polshed $1500
Specs are
2.02 intake and 1.60 exhuast vavle
59cc; bronze guides, hardened spring pads and valve gudies plates
Flow numbers are
Lift Intake Exhuast
.300 192 162
.400 225 187
.500 259 203
.550 276 208
.600 283 213
LT1 edit OBD II for 300.
all prices are wiht out shipping and OBO pm me for pics and any info you moght need. also If you have any questions my number is 325-864-1653
Last edited by bandit383; 12-26-2008 at 11:22 PM.
#2
TECH Fanatic
iTrader: (6)
Join Date: Oct 2007
Location: Central Valley, CA
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
LT1 Edit??
I was just curious about the edit software and I was wondering what version this is as the software is married to one PCM unless you paid 2k for it. Is this software even usable?