Forged roller 383 210 AFR 1054 Part out NANO
12-05-2008, 07:41 AM
#1
TECH Regular
Thread Starter
iTrader: (15)
Join Date: Jun 2004
Location: Shawnee KS
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Forged roller 383 210 AFR 1054 Part out NANO Due to a non paying buyer on the whole motor, I am now parting out the whole thing. Prices do not include shipping.
bottom end/lifters/cam have ~6k miles on it. The topend has about 1200miles on it. This motor has seen several bottles of nitrous but no more then 115rwhp was ever gained due to flow limitations of the NOS topshot.
Heads are the new AFR 1054 210cc 65cc eliminators that came out this year. They will come with comp cams 950 dual springs installed at 1.92"
383 Short block SOLD
AFR 210 heads $1,300.00 PENDING
XR288 cam SOLD 12-433-8 hydro roller 236/242 .520/.540 110lsa SOLD
Comp retrofit hydro lifters SOLD
1.52 7/16 CC pro mag rockers $225.00 CCA-1304-16
Cloys roller timing cover SOLD CLO-9-221 (handy for retro fit roller cams, as you can set cam end play with cover installed)
Edelbrock Victor series black valvecovers $50.00 EDL-41733 (one has a small crack from being too tight, leaks few drops of oil per 100-200 miles)
ARP 6pt head studs $85.00
NOS Topshot module/hardlines/bulk head fittings $125
Vortec RPM air gap intake $150.00 PN EDL-7516
standard RPM air gap intake SOLD EDL - 7501
K&N extreme air filter $85.00 KNN-66-3040 (I think thats the PN) filtered top and 3x14" air filter
bottom end/lifters/cam have ~6k miles on it. The topend has about 1200miles on it. This motor has seen several bottles of nitrous but no more then 115rwhp was ever gained due to flow limitations of the NOS topshot.
Heads are the new AFR 1054 210cc 65cc eliminators that came out this year. They will come with comp cams 950 dual springs installed at 1.92"
383 Short block SOLD
AFR 210 heads $1,300.00 PENDING
XR288 cam SOLD 12-433-8 hydro roller 236/242 .520/.540 110lsa SOLD
Comp retrofit hydro lifters SOLD
1.52 7/16 CC pro mag rockers $225.00 CCA-1304-16
Cloys roller timing cover SOLD CLO-9-221 (handy for retro fit roller cams, as you can set cam end play with cover installed)
Edelbrock Victor series black valvecovers $50.00 EDL-41733 (one has a small crack from being too tight, leaks few drops of oil per 100-200 miles)
ARP 6pt head studs $85.00
NOS Topshot module/hardlines/bulk head fittings $125
Vortec RPM air gap intake $150.00 PN EDL-7516
standard RPM air gap intake SOLD EDL - 7501
K&N extreme air filter $85.00 KNN-66-3040 (I think thats the PN) filtered top and 3x14" air filter
Last edited by MaxxMitchell; 01-13-2009 at 07:32 AM.
Trending Topics
04-16-2009, 10:43 AM
#12
