parts for sale
03-25-2009, 06:27 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (19)
Join Date: Dec 2006
Location: Lynchburg, Va
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
parts for sale REMEMBER TO INCLUDE THE 3% fee if using PayPal!
i will NOT hold anything without a deposit (non refundable) everything is first come first serve! no calling dibs, if you dont pay you dont get it sorry guys
396 LT1 all new 0 miles, Callies compstar crank, Callies compstar H beam stroker rods, SRP flat tops (11:1 CR with a 54cc head), all new bearings, Milidon 6qt pan, melling oil pump, Comp double roller timing chain (has timing cover with the short lock), custom grind SOLID ROLLER stroker cam (yes its BIG, no its NOT A DD CAM!) i will sell without the cam for $125 less... asking 2700 for the short block. SOLD!
643 LT1 castings with cut/welded/ported intake runners, valve springs setup for the cam in the short block. stock valves. they flow great and took pauls 383 car to a 11.0 EASY. with the heads come a set of T&D shaft 1.6 rockers. asking 1400 obo + shipping for these. SOLD!
ProForm cast valve covers to clear shaft rockers SOLD!
new never used Summit Throttle body 58MM Satin, new from summit it is 233 +their shipping ill do $230 SHIPPED SOLD!
LT1/SBC oil filter adapter with no bypass so you get 0 unfiltered oil, new never used SOLD!
LT1 felpro head gaskets one opened to see if they were right. $60 shipped SOLD!
ATI superdamper with less than 1k miles on it asking 260+ shipping SOLD!
Magnaflow Catback with less than 100 miles on it with e cutout in SOLD!
95^ vented opti with 1k miles $120 + shipping SOLD!
LPP stainless headers and y pipe, they fit great on my car and only hit the pass frame a smidgen, so i heated and dented the primary about 1/4" in
425+shipping SOLD!
1 stock replacement 93-94 LT1 timing chain $40 shipped little wear i think it had 2k miles on it. SOLD!
42# FMS injectors 1k miles SOLD!
TrickFlow stock Length pushrods hardened for guideplates 5k miles $75 shipped SOLD!
Summit 1.6 Rockers 5k miles 175 shipped! SOLD!
GMPP guideplates for LT1's $15 shipped SOLD!
Six Speeds Inc T56 stage 4+ micronited and all available upgrades other than the 30 spline viper spec output 1400 +shipping SOLD!
CC503 cam same mileage as above SOLD!
LT1 underdrive pulley by march $30 SOLD!
LT4 intake gaskets (ordered wrong gaskets and opened them so i cant return them) 10+ shipping
LT1 Alternator from my 94 with 4k miles on it... Autozone part in GREAT shape! 100 + shipping
LT1 STOCK K member $50 picked up only
96 LT1 timing cover with WP hole welded, and CPS hole welded. $20 + shipping
1 stock replacement 95-97 LT1 chain kit with 5k $40 shipped
93-94 Camaro opti with 10k worked great when removed from my car, vacuumed all coolant out through the radiator so it didnt get wet $75 +shipping
Mcleod Street twin for LT1/4 cars with adjustable master cyl. only 500 miles asking 750+shipping
stock ported TB with air foil $30 + shipping
CSR electric water pump in hoisuing with 160* t-stat 170 +shipping about 1000 miles on it.
LS7 lifters used 5k miles $75 +shipping
will do package deal on rockers, lifters, plates, and pushrods for $275 SHIPPED!!
Crane 10308 spring kit for the 503 cam 100 + shipping
94 Z28 heads "374" castings no springs/locks/retainers $150+shipping
(or i can install the 10308's on these for $225 + shipping)
94 LT1 short block stock 152k miles needs rings $175+ shipping
96 LT1 block $100 + shipping
1 set of LT1 rods/pistons unknown mileage $50 plus shipping on, rods are great!
LT1 oil pan $30
stock LT1 intake $50+ shipping
stock crank NEEDS to be turned, dont know how much $25+ shipping
stock Impy LT1 water pump housing $15+ shipping
B&M ripper Shifter with short stick (custom) $125 +shipping
Mallory Hyfire with adapter to LT1 coil $200 shipped
Taylor OTVC kit already cut $50 + shipping
OBDI PCM programed for LT1 with boltons T56 and 4.10's w/LT4 KM !egr!air!cags!evap and every other sensor you can delete
LT1 6speed wiring harness out of a 95 Z a few connectors cut but will be included $75 + shipping
LT1 1LE intake Elbow $45 shipped
MSD blaster Coil 1k miles on it $ 25 shipped
front accessory bracket $25+ shipping
LT1 AC compressor $ 50 shipped
LT1 motor mounts and brackets (k member brackets and motor brackets) $35 shipped
Transdapt CAI (copy of the moroso) with K&N filter that needs to be cleaned $100 shipped
LT1 descreened MAF $40 shipped
LT1 valve covers $25 shipped
LT1 starter $45 shipped
others to come soon as i start digging through my pile of parts in the shop... will trade for LS parts like headers with y pipe, Mcleod twin disc for LS and other boltons such as fast 92/92 nitrous kits... etc.
i will NOT hold anything without a deposit (non refundable) everything is first come first serve! no calling dibs, if you dont pay you dont get it sorry guys
396 LT1 all new 0 miles, Callies compstar crank, Callies compstar H beam stroker rods, SRP flat tops (11:1 CR with a 54cc head), all new bearings, Milidon 6qt pan, melling oil pump, Comp double roller timing chain (has timing cover with the short lock), custom grind SOLID ROLLER stroker cam (yes its BIG, no its NOT A DD CAM!) i will sell without the cam for $125 less... asking 2700 for the short block. SOLD!
643 LT1 castings with cut/welded/ported intake runners, valve springs setup for the cam in the short block. stock valves. they flow great and took pauls 383 car to a 11.0 EASY. with the heads come a set of T&D shaft 1.6 rockers. asking 1400 obo + shipping for these. SOLD!
ProForm cast valve covers to clear shaft rockers SOLD!
new never used Summit Throttle body 58MM Satin, new from summit it is 233 +their shipping ill do $230 SHIPPED SOLD!
LT1/SBC oil filter adapter with no bypass so you get 0 unfiltered oil, new never used SOLD!
LT1 felpro head gaskets one opened to see if they were right. $60 shipped SOLD!
ATI superdamper with less than 1k miles on it asking 260+ shipping SOLD!
Magnaflow Catback with less than 100 miles on it with e cutout in SOLD!
95^ vented opti with 1k miles $120 + shipping SOLD!
LPP stainless headers and y pipe, they fit great on my car and only hit the pass frame a smidgen, so i heated and dented the primary about 1/4" in
425+shipping SOLD!
1 stock replacement 93-94 LT1 timing chain $40 shipped little wear i think it had 2k miles on it. SOLD!
42# FMS injectors 1k miles SOLD!
TrickFlow stock Length pushrods hardened for guideplates 5k miles $75 shipped SOLD!
Summit 1.6 Rockers 5k miles 175 shipped! SOLD!
GMPP guideplates for LT1's $15 shipped SOLD!
Six Speeds Inc T56 stage 4+ micronited and all available upgrades other than the 30 spline viper spec output 1400 +shipping SOLD!
CC503 cam same mileage as above SOLD!
LT1 underdrive pulley by march $30 SOLD!
LT4 intake gaskets (ordered wrong gaskets and opened them so i cant return them) 10+ shipping
LT1 Alternator from my 94 with 4k miles on it... Autozone part in GREAT shape! 100 + shipping
LT1 STOCK K member $50 picked up only
96 LT1 timing cover with WP hole welded, and CPS hole welded. $20 + shipping
1 stock replacement 95-97 LT1 chain kit with 5k $40 shipped
93-94 Camaro opti with 10k worked great when removed from my car, vacuumed all coolant out through the radiator so it didnt get wet $75 +shipping
Mcleod Street twin for LT1/4 cars with adjustable master cyl. only 500 miles asking 750+shipping
stock ported TB with air foil $30 + shipping
CSR electric water pump in hoisuing with 160* t-stat 170 +shipping about 1000 miles on it.
LS7 lifters used 5k miles $75 +shipping
will do package deal on rockers, lifters, plates, and pushrods for $275 SHIPPED!!
Crane 10308 spring kit for the 503 cam 100 + shipping
94 Z28 heads "374" castings no springs/locks/retainers $150+shipping
(or i can install the 10308's on these for $225 + shipping)
94 LT1 short block stock 152k miles needs rings $175+ shipping
96 LT1 block $100 + shipping
1 set of LT1 rods/pistons unknown mileage $50 plus shipping on, rods are great!
LT1 oil pan $30
stock LT1 intake $50+ shipping
stock crank NEEDS to be turned, dont know how much $25+ shipping
stock Impy LT1 water pump housing $15+ shipping
B&M ripper Shifter with short stick (custom) $125 +shipping
Mallory Hyfire with adapter to LT1 coil $200 shipped
Taylor OTVC kit already cut $50 + shipping
OBDI PCM programed for LT1 with boltons T56 and 4.10's w/LT4 KM !egr!air!cags!evap and every other sensor you can delete
LT1 6speed wiring harness out of a 95 Z a few connectors cut but will be included $75 + shipping
LT1 1LE intake Elbow $45 shipped
MSD blaster Coil 1k miles on it $ 25 shipped
front accessory bracket $25+ shipping
LT1 AC compressor $ 50 shipped
LT1 motor mounts and brackets (k member brackets and motor brackets) $35 shipped
Transdapt CAI (copy of the moroso) with K&N filter that needs to be cleaned $100 shipped
LT1 descreened MAF $40 shipped
LT1 valve covers $25 shipped
LT1 starter $45 shipped
others to come soon as i start digging through my pile of parts in the shop... will trade for LS parts like headers with y pipe, Mcleod twin disc for LS and other boltons such as fast 92/92 nitrous kits... etc.
Last edited by ZeeTwentyFate; 04-02-2009 at 08:59 PM. Reason: parts added
Trending Topics
03-27-2009, 09:05 AM
#10
Teching In
Join Date: Aug 2008
Location: Hubertus, WI
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Will that trans fit a 1994 LT1 camaro I already have 6 speed just need to upgrade? If so I will take it pm me please, Kin you also get a quote on shipping to 53033
Thankyou Ron
Thankyou Ron
03-27-2009, 01:20 PM
#14
TECH Enthusiast
Thread Starter
iTrader: (19)
Join Date: Dec 2006
Location: Lynchburg, Va
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
i can send it back for more than that
i can ship it to you UPS for $125+ the tranny price
03-27-2009, 03:33 PM
#15
Teching In
Join Date: Aug 2008
Location: Hubertus, WI
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Sounds great we will skip the gaskets for now then, What is your paypal account number or PM me it how eva you want, and you want me to pm you my address?, O and last ? the trany is in working condition rite? just checking ha ha
Thonkyou Ron
Thonkyou Ron
lol
03-27-2009, 10:19 PM
#17
Teching In
Join Date: Aug 2008
Location: Hubertus, WI
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Lol I already have 2 of the same clutch set ups complete, one in the car the otha a back up lol so just need the trans, I sent you the payment for the trans to nite so let me no when you kin ship it I'm hopen asap lol
Thankyou Ron
Thankyou Ron
