AFR 195cc heads, LT4 intake, etc...
05-06-2009, 11:51 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: May 2007
Location: Statesboro, Georgia
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
AFR 195cc heads, LT4 intake, etc... pics will be up tonight. I dont have individual parts pics, but have a few of the motor together. parts are pretty firm on pricing, not including shipping. dont hesitate to send an offer though. Serious buyers please. Parts are on car as we speak, but they are being pulled in the next week at most
AFR 195cc heads, assembled from AFR. 2.05in, 1.60ex valve sizes, dual springs, cnc from AFR. 1400.00
LT4 Edelbrock Air Gap, 350.00
Holley 58mm Throttle body 300.00
Used cc306 cam 125.00
MSD billet distributor 350.00
GMPP lt1 timing set 150.00
comp ultra gold 1.6RR NSA 3/8 stud 200.00
parts came off of a 1996 Impala. buddy built the motor and it spun a bearing in less than 100 miles. outran an sprayed LS2 GTO with the setup in the 1996 impala boat! PM if interested, or email at SLawson86@yahoo.com
My feedback isnt huge due to some fellow LS1techers not leaving it, but hopefully someone will vouch for me. Thanks Guys!
AFR 195cc heads, assembled from AFR. 2.05in, 1.60ex valve sizes, dual springs, cnc from AFR. 1400.00
LT4 Edelbrock Air Gap, 350.00
Holley 58mm Throttle body 300.00
Used cc306 cam 125.00
MSD billet distributor 350.00
GMPP lt1 timing set 150.00
comp ultra gold 1.6RR NSA 3/8 stud 200.00
parts came off of a 1996 Impala. buddy built the motor and it spun a bearing in less than 100 miles. outran an sprayed LS2 GTO with the setup in the 1996 impala boat! PM if interested, or email at SLawson86@yahoo.com
My feedback isnt huge due to some fellow LS1techers not leaving it, but hopefully someone will vouch for me. Thanks Guys!
05-06-2009, 02:42 PM
#3
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: May 2007
Location: Statesboro, Georgia
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the bump. i know the prices are a bit stiff, but reasonable offers... send away! buddy set the prices, i am just relaying the message.
05-06-2009, 05:05 PM
#7
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: May 2007
Location: Statesboro, Georgia
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
the part number is AFR-1031. (sorry to the guys i PM'd, this is the correct part number)
the heads were purchased a bit over a month ago, and he recieved them about 2 weeks ago. he trashed the bottom end of his impala over-revving and decided to part his car, put a stock LT1 back in it, and buy another project. thanks!
ALL OF THESE PARTS HAVE LESS THAN 100 MILES ON THEM
the heads were purchased a bit over a month ago, and he recieved them about 2 weeks ago. he trashed the bottom end of his impala over-revving and decided to part his car, put a stock LT1 back in it, and buy another project. thanks!
ALL OF THESE PARTS HAVE LESS THAN 100 MILES ON THEM
Trending Topics
05-12-2009, 03:18 PM
#9
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: May 2007
Location: Statesboro, Georgia
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
sorry it took so long to get back to you guys. parts arent for sale anymore. the owner has changed directions yet again and is going to use this stuff again. sorry for the inconvenience. 
mods /thread please
mods /thread please 