Aftermarket LT1 GO FAST PARTS
05-26-2009, 04:34 PM
#1
On The Tree
Thread Starter
iTrader: (15)
Join Date: Mar 2006
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket LT1 GO FAST PARTS Ported LT1 Intake Manifold 58mm/runners $300
BBK Throttle Body 58mm $250
58mm TNW TB NOS plate $100
Comp Cams Lifters $100
30lb. SVO Red Top Injectors $150
Polished Fuel Rail $40
Stock injectors 24lb i think $50
Comp Cams Pushrods 7.15" $30
Pacesetter Longtubes/Race Style/Ceramic Coated/300 miles $300
LT1 Engine/Hotcam Kit/Mild Head/Intake work $1500
Kooks Stainless Longtubes with catted y pipe $600
all parts have less then 2000 miles/motor has 60k,10k on hotcam and porting and kooks
BBK Throttle Body 58mm $250
58mm TNW TB NOS plate $100
Comp Cams Lifters $100
30lb. SVO Red Top Injectors $150
Polished Fuel Rail $40
Stock injectors 24lb i think $50
Comp Cams Pushrods 7.15" $30
Pacesetter Longtubes/Race Style/Ceramic Coated/300 miles $300
LT1 Engine/Hotcam Kit/Mild Head/Intake work $1500
Kooks Stainless Longtubes with catted y pipe $600
all parts have less then 2000 miles/motor has 60k,10k on hotcam and porting and kooks
Last edited by str8rpn; 05-28-2009 at 05:27 PM.
05-26-2009, 07:29 PM
#3
On The Tree
Thread Starter
iTrader: (15)
Join Date: Mar 2006
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
1 7/8 have emissions
these were custom made and i have receipt for $3,000 which includes headers, y pipe, 2 high flow cats, and a magnaflow exhaust installed.
headers are stainless and stepped, y pipe is steel, headers have a touch of scuffing from bottoming out. nothing that will affect flow.
these were custom made and i have receipt for $3,000 which includes headers, y pipe, 2 high flow cats, and a magnaflow exhaust installed.
headers are stainless and stepped, y pipe is steel, headers have a touch of scuffing from bottoming out. nothing that will affect flow.
Trending Topics
05-27-2009, 08:15 PM
#11
i will take the adj fpr as long as it fits the stock fuel setup, and whats the specs on the pushrods? length, hardened etc? i need a stock length set for use with guideplates, and will take the pushrods if they fit the bill
05-28-2009, 03:50 PM
#13
you mean magnum pushrods, they are heat treated chromemoly, dont think magnesuem pushrods would hold up well!! pm sent
no need for the rail, take the 7.2 set and the adj fpr
pm sent
no need for the rail, take the 7.2 set and the adj fpr
pm sent
05-28-2009, 06:35 PM
#15
