Monoblade, 1.6 Pro-mags, MAF, K&N W/Halltech filter, 42 lb svo's
06-02-2009, 11:31 AM
#1
Monoblade, 1.6 Pro-mags, MAF, K&N W/Halltech filter, 42 lb svo's Ok guys I'm starting to list parts off my Trans am so here's a few things.
Arizona speed and marine monoblade throttle body. Flows 1300 cfm. Used only for 29 miles. SOLD
Comp Cams pro magnum roller rockers 1.6 7/16 stud with poly locks. 29 miles. SOLD
Descreened MAF with billet ends. Works great in my TA. $100 plus shipping.
K&N CAI with Corvette Halltech filter. The filter fits, you have to come up from the bottom though. K&N is used in great shape, Halltech filter is brand new, filter costs more than $100. I'll take $160 plus shipping.
Ford motorsports SVO 42lb green top injectors. Work flawlessly. Have just over 1k miles and are perfect. $225 plus shipping. Add polished fuel rails for an extra $50.
Prices are pretty firm guys. I feel like they are priced well. This is just the first post there will be more with more stuff in a little bit. I take paypal but you have to pay the 3%.
Zach
Arizona speed and marine monoblade throttle body. Flows 1300 cfm. Used only for 29 miles. SOLD
Comp Cams pro magnum roller rockers 1.6 7/16 stud with poly locks. 29 miles. SOLD
Descreened MAF with billet ends. Works great in my TA. $100 plus shipping.
K&N CAI with Corvette Halltech filter. The filter fits, you have to come up from the bottom though. K&N is used in great shape, Halltech filter is brand new, filter costs more than $100. I'll take $160 plus shipping.
Ford motorsports SVO 42lb green top injectors. Work flawlessly. Have just over 1k miles and are perfect. $225 plus shipping. Add polished fuel rails for an extra $50.
Prices are pretty firm guys. I feel like they are priced well. This is just the first post there will be more with more stuff in a little bit. I take paypal but you have to pay the 3%.
Zach
Last edited by za355tx; 06-09-2009 at 01:14 AM.
06-02-2009, 03:49 PM
#2
MSD opti, ATI super damper, CSR EWP I'm making some posts of the things I have from my TA. These three parts all have only 29 miles on them. They are in perfect working order and still look new.
MSD pro billet opti 92-94 LT1. SOLD
ATI super damper 6.75 inch with hub. $325 plus shipping
CSR EWP in LT1 water pump housing with SLP 160* thermostat. SOLD
I take paypal but you will need to add the 3%. Prices are pretty firm so don't offer something rediculous please.
Zach
MSD pro billet opti 92-94 LT1. SOLD
ATI super damper 6.75 inch with hub. $325 plus shipping
CSR EWP in LT1 water pump housing with SLP 160* thermostat. SOLD
I take paypal but you will need to add the 3%. Prices are pretty firm so don't offer something rediculous please.
Zach
Last edited by za355tx; 06-11-2009 at 10:28 PM.
06-02-2009, 03:59 PM
#3
T56 and swap parts, Spec 3, Spec FW, Hurst Starting a partout list from my TA. Here's some tranny stuff.
T56 from a 96 TA. Has only 16k miles and shifts PERFECTLY. No issues what so ever. $900 plus shipping.
Spec 3 clutch with 29 miles. $400 plus shipping
Spec billet steel FW with 29 miles $200 plus shipping.
Factory hurst shifter from 96 car with hurst stick and 6 speed shift ball. $110 plus shipping.
I've also got the complete swap stuff for the 6 speed, including bellhousing, crossmember, master and slave cylinders, clutch fork, pedals, and whatever else you need. $250 plus shipping.
I'm willing to do a package deal for everything. Prices are pretty firm as they sit. Prices are more than fair for perfect working stuff. Here's a pic before it went into the car. I take paypal but you need to pickup the 3% fee.
Zach
T56 from a 96 TA. Has only 16k miles and shifts PERFECTLY. No issues what so ever. $900 plus shipping.
Spec 3 clutch with 29 miles. $400 plus shipping
Spec billet steel FW with 29 miles $200 plus shipping.
Factory hurst shifter from 96 car with hurst stick and 6 speed shift ball. $110 plus shipping.
I've also got the complete swap stuff for the 6 speed, including bellhousing, crossmember, master and slave cylinders, clutch fork, pedals, and whatever else you need. $250 plus shipping.
I'm willing to do a package deal for everything. Prices are pretty firm as they sit. Prices are more than fair for perfect working stuff. Here's a pic before it went into the car. I take paypal but you need to pickup the 3% fee.
Zach
06-02-2009, 04:08 PM
#4
Rear performance suspension parts, UMI, BMR, Spohn, 4.10 rear Still making post selling off parts from my TA so here's the suspension stuff.
BMR upper panhard bar relocation kit. About 3k miles Red SOLD
UMI PHR poly bushings, non adj. and red, 29 miles, $50 plus shipping
BMR LCA's, Black, poly bushings, non adj. about 3k miles SOLD
UMI LCA bolt in relocation brackets, red, 29 miles, SOLD
Spohn 1 inch rear sway bar, Chromoly, Red, 29 miles, Has some chips in the powdercoat you can't really see unless it's off the car, but otherwise great condition. Comes with bushings and endlinks from Spohn. $120 plus shipping
1LE front sway bar 32mm. Painted red. $60 plus shipping
STB painted same color red as the 1LE BMR I think. $50 plus shipping
Aluminum DS from LS1 SS. Has about 20k on it and in excellent shape. $110 plus shipping.
3 channel rear end with GM 4.10 gears setup by Jason at TDP 8k miles ago. Great shape absolutely no noise, TA girdle. Royal purple 75w140 gear oil. ARP wheel studs. I've cut two back to about stock length but my wheel gave out so the other 8 are still 2.5 inches. I can finish cutting them if you'd like. $425 prefer not to ship. But if you're willing to completely cover shipping then I may ship it.
I take paypal but you have to cover all the 3% fee. Will have pics up asap. Everything is in great shape.
Zach
BMR upper panhard bar relocation kit. About 3k miles Red SOLD
UMI PHR poly bushings, non adj. and red, 29 miles, $50 plus shipping
BMR LCA's, Black, poly bushings, non adj. about 3k miles SOLD
UMI LCA bolt in relocation brackets, red, 29 miles, SOLD
Spohn 1 inch rear sway bar, Chromoly, Red, 29 miles, Has some chips in the powdercoat you can't really see unless it's off the car, but otherwise great condition. Comes with bushings and endlinks from Spohn. $120 plus shipping
1LE front sway bar 32mm. Painted red. $60 plus shipping
STB painted same color red as the 1LE BMR I think. $50 plus shipping
Aluminum DS from LS1 SS. Has about 20k on it and in excellent shape. $110 plus shipping.
3 channel rear end with GM 4.10 gears setup by Jason at TDP 8k miles ago. Great shape absolutely no noise, TA girdle. Royal purple 75w140 gear oil. ARP wheel studs. I've cut two back to about stock length but my wheel gave out so the other 8 are still 2.5 inches. I can finish cutting them if you'd like. $425 prefer not to ship. But if you're willing to completely cover shipping then I may ship it.
I take paypal but you have to cover all the 3% fee. Will have pics up asap. Everything is in great shape.
Zach
Last edited by za355tx; 06-12-2009 at 04:36 PM.
Trending Topics
06-02-2009, 09:31 PM
#9
i heard that, my lt1 is knockin like a son of a bitch and i need to rebuild it...im so broke its required to be a cheap build which is not what i wanted. either that or im gonna wait till i blow it and buy a drop in lol
