Going to part out 11 sec T-56 95 9C1 inside and out
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jul 2008
Location: Kansas City
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is a warm up thread and the car is still together at the moment but will be starting to part it out next week. I will have pics by this weekend but here is a loose list
AI ported 185cc heads with 1.55 roller springs with custom comp 230/236 .544/.555 (with 1.6) Very nitrous friendly cam. Made 370hp 355tq at the wheels one bone stock shortblock and I am pretty sure there was a little more to be had. On 125 shot made 475/505. SOLD
BBK 58mm SOLD
Stock intake opened to 58mm and painted black. Spotless. $75
Bosch 36lb injectors. 1000 miles. SOLD
LT4 valve covers with hardware and gaskets SOLD
Meziere electric water pump in b body housing, will include wiring for easy install SOLD
Pro Gear single roller timing chain 1000 miles SOLD
Moroso 7 qt pan with oil level hole and temp sensor hole (currently plugged) and with pick up for HV pump. $200
Exhaust system 3inch all mandrel bent out the rear. Flowtech jet hot coated headers, 3inch x pipe, flowtech raptor mufflers and CIA over the axle pipes. Tucks up under rear bumper and slant cut so it points downwards. Sounds incredible. Not too loud at all. $800 (spent that on just headers and over the axle pipes so add on x pipe, o2 bungs and all of the labor)
Cold air intake. Ceramic aluminum elbow, f-body maf, heat shielded pcv and K&N 6in x 12in SOLD
Nitrous kit, 10lb bottle, new NOS solenoids, feed line, purge, autometer phantom elec press gauge, 58mm compucar plate, bottle warmer and all wiring. $550
Nano nitrous 10lb competition kit http://shopping.netsuite.com/s.nl/c....it.A/id.196/.f
$450
CCW wheels 17x11 and 17x10.5 with 315/35/17 Yokohama AVS all the way around. Look up the tires and they are more than my asking price. Weigh about 55lbs each. Best damn thing I ever put on my car. $1200
Draglites 15x8 and 15x5 with very low use 26/10.5 MT et drags and new bfg's on the front $600
T56 swap for b body. F2B kit, Spec lightweight billet flywheel, Spec stage 3 clutch, New Hydraulics, T56 trans, CIA tubular crossmember and pro 5.0 shifter with hurst t handle with button switch. Everything youll need for swap all in great shape and super strong. (May part out make offers) $1700 (PENDING)
Dynotech MMC stock length driveshaft (there are guys running 10s with this shaft) $400
Built rearend 4.56 motive gears with Eaton pro posi. About 2500 miles. complete disc to disc with calipers. $750
6 impala ss wheels. Some have decent tires. Would say 2 good ones for sure. SOLD
z28 cluster. Modified for b and has been in my car for about a year. $100
I have a full grey interior with very nice door panels, matching color grey 12 way bonneville seats, perfect dash, rear seat is leather caprice, newer aftermarket carpet etc. If I could sell it all together I would take $600. Make offers for parts. Would like to sell all door panels together regardless. SEATS SOLD
Smoked Tails ready to install and will include led bulbs SOLD
The body will be for sale as a whole or parts. Windows are 20% tinted and body is pretty nice overall. Light door dings and 3 antenee holes in roof
Will be adding more later and pics. If you have any questions please feel free to ask
AI ported 185cc heads with 1.55 roller springs with custom comp 230/236 .544/.555 (with 1.6) Very nitrous friendly cam. Made 370hp 355tq at the wheels one bone stock shortblock and I am pretty sure there was a little more to be had. On 125 shot made 475/505. SOLD
BBK 58mm SOLD
Stock intake opened to 58mm and painted black. Spotless. $75
Bosch 36lb injectors. 1000 miles. SOLD
LT4 valve covers with hardware and gaskets SOLD
Meziere electric water pump in b body housing, will include wiring for easy install SOLD
Pro Gear single roller timing chain 1000 miles SOLD
Moroso 7 qt pan with oil level hole and temp sensor hole (currently plugged) and with pick up for HV pump. $200
Exhaust system 3inch all mandrel bent out the rear. Flowtech jet hot coated headers, 3inch x pipe, flowtech raptor mufflers and CIA over the axle pipes. Tucks up under rear bumper and slant cut so it points downwards. Sounds incredible. Not too loud at all. $800 (spent that on just headers and over the axle pipes so add on x pipe, o2 bungs and all of the labor)
Cold air intake. Ceramic aluminum elbow, f-body maf, heat shielded pcv and K&N 6in x 12in SOLD
Nitrous kit, 10lb bottle, new NOS solenoids, feed line, purge, autometer phantom elec press gauge, 58mm compucar plate, bottle warmer and all wiring. $550
Nano nitrous 10lb competition kit http://shopping.netsuite.com/s.nl/c....it.A/id.196/.f
$450
CCW wheels 17x11 and 17x10.5 with 315/35/17 Yokohama AVS all the way around. Look up the tires and they are more than my asking price. Weigh about 55lbs each. Best damn thing I ever put on my car. $1200
Draglites 15x8 and 15x5 with very low use 26/10.5 MT et drags and new bfg's on the front $600
T56 swap for b body. F2B kit, Spec lightweight billet flywheel, Spec stage 3 clutch, New Hydraulics, T56 trans, CIA tubular crossmember and pro 5.0 shifter with hurst t handle with button switch. Everything youll need for swap all in great shape and super strong. (May part out make offers) $1700 (PENDING)
Dynotech MMC stock length driveshaft (there are guys running 10s with this shaft) $400
Built rearend 4.56 motive gears with Eaton pro posi. About 2500 miles. complete disc to disc with calipers. $750
6 impala ss wheels. Some have decent tires. Would say 2 good ones for sure. SOLD
z28 cluster. Modified for b and has been in my car for about a year. $100
I have a full grey interior with very nice door panels, matching color grey 12 way bonneville seats, perfect dash, rear seat is leather caprice, newer aftermarket carpet etc. If I could sell it all together I would take $600. Make offers for parts. Would like to sell all door panels together regardless. SEATS SOLD
Smoked Tails ready to install and will include led bulbs SOLD
The body will be for sale as a whole or parts. Windows are 20% tinted and body is pretty nice overall. Light door dings and 3 antenee holes in roof
Will be adding more later and pics. If you have any questions please feel free to ask
Last edited by vandal699; 07-15-2009 at 02:27 PM.
Trending Topics
#14
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jul 2008
Location: Kansas City
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://s229.photobucket.com/albums/e...0sale/?start=0
Pics of the car that show some of the parts also. Look at the 2nd page for more. Please PM me with parts requests. Will start taking parts off this week and weekend
Pics of the car that show some of the parts also. Look at the 2nd page for more. Please PM me with parts requests. Will start taking parts off this week and weekend