lt1 partout(from my rx7 build) plus nitrous
10-08-2009, 06:31 AM
#1
lt1 partout(from my rx7 build) plus nitrous Already sold a lot, but here is what I have left from my lt1 build out of my rx7...
lt1 shortblock with 90k miles, rings are bad in 3 cylinders(still drove fine, I drove it for about 2k miles with bad rings, I got the shortblock it had low compression and didn't know, could slap in new rings/bearings for cheap and have a fresh motor) $150 PRICE LOWERED
nitrous kit - NX big fuel/nitrous noids, with safety NX nitrous noid(I always run two nitrous noids back to back incase one sticks), plus nos purge, nitrodaves noid bracket, wot switch, shark nozzle with hard lines going to it, main feed line, and line from fuel rail to fuel noid. This is what I was running on my car, pic below, it's not a cheap setup. No bottle included as I used the 15lb nano kit above. $325 PRICE LOWERED
More to come as I find more parts.
lt1 shortblock with 90k miles, rings are bad in 3 cylinders(still drove fine, I drove it for about 2k miles with bad rings, I got the shortblock it had low compression and didn't know, could slap in new rings/bearings for cheap and have a fresh motor) $150 PRICE LOWERED
nitrous kit - NX big fuel/nitrous noids, with safety NX nitrous noid(I always run two nitrous noids back to back incase one sticks), plus nos purge, nitrodaves noid bracket, wot switch, shark nozzle with hard lines going to it, main feed line, and line from fuel rail to fuel noid. This is what I was running on my car, pic below, it's not a cheap setup. No bottle included as I used the 15lb nano kit above. $325 PRICE LOWERED
More to come as I find more parts.
Last edited by skinnies; 11-11-2009 at 04:46 PM.
