LT1 Hooker long tube headers a OTA true duals F/S
#1
LT1 Hooker long tube headers a OTA true duals F/S
Hey everyone I'm going to a forced induction setup and I'm selling my Hooker long tube headers and my custom OTA true duals. They are 2.5 inch, and all the clamps are stainless dynomax clamps. The tips are dual 3" stainless. I've had the true duals on for like 1000 miles after I built them. The headers were on the car when i got it. Everything is coated in POR20 high temp ceramic enamel. They have EXCELLENT ground clearance. As good as you could ever get, and waayyy better than my old magnaflow catback and jet hot ORY.
You can install them with the axle and upper panhard bar still in the car. They had no issues with scraping or hitting the axle even with eibach sportlines and a ford 9 inch rearend (bigger axle tubes). They have a bung welded in each header for 02 sensors. The X pipe has the same volume as 2 2.5 inch pipes unlike some X pipes which "bottleneck".
I'd like to not seperate them.
$550 dollars is what I'm looking to get out of them. I'm located in Transfer PA 16154 I will travel some ways to meet if you pay for gas. I will ship but shipping will be pretty bogus on these.
Well I think I have covered everything. If you have any questions give me a call at 724 456 7710.
Not really interested in trades unless you have wastegates, BOVs, FMICs, cold side tubing, couplers, t bands, etc.
Here they are after I just took them off last night.
Here they are a few weeks ago when I finished them.
All the stainless band clamps included! You will need to buy nothing other than header gaskets, and you will need like 2 hangers from autozone and someone to weld them onto your frame real quick. All the other hardware and the custom that goes on the tunnel brace is included. This a a great setup!
You can install them with the axle and upper panhard bar still in the car. They had no issues with scraping or hitting the axle even with eibach sportlines and a ford 9 inch rearend (bigger axle tubes). They have a bung welded in each header for 02 sensors. The X pipe has the same volume as 2 2.5 inch pipes unlike some X pipes which "bottleneck".
I'd like to not seperate them.
$550 dollars is what I'm looking to get out of them. I'm located in Transfer PA 16154 I will travel some ways to meet if you pay for gas. I will ship but shipping will be pretty bogus on these.
Well I think I have covered everything. If you have any questions give me a call at 724 456 7710.
Not really interested in trades unless you have wastegates, BOVs, FMICs, cold side tubing, couplers, t bands, etc.
Here they are after I just took them off last night.
Here they are a few weeks ago when I finished them.
All the stainless band clamps included! You will need to buy nothing other than header gaskets, and you will need like 2 hangers from autozone and someone to weld them onto your frame real quick. All the other hardware and the custom that goes on the tunnel brace is included. This a a great setup!
Trending Topics
#10
On The Tree
iTrader: (14)
Join Date: Aug 2007
Location: North of the Twin Cities
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
How well does this system tuck up to the car? I will be lowering my car with the Pro-Kit. How will the ground clearance be? What does it sound like? Was there a lot of rasp or popping or anything like that? How much would shipping be to 55092. Could you please PM me. Thanks a lot!
-Joe
-Joe
#11
Hey, how much would you want for just the exhaust setup? would it be possible for you to cut it up and ship it that way? Let me know, looks like a really nice setup, i've been looking for something like that for a while... send me a PM with your price if you want, since it seems like someone's interested in the headers themselves...