ati d1 procharger
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: miami beach fl
Posts: 1,652
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a ati d1 procharger kit for a sbc Id like to get rid of being that I havent had a car with a sbc in 3 years .
kit includes
headunit
billet bracket with tensioner
12 rib crank pulley
12 rib pulley
4 inch carb hat
silicon hoses for the outlet to the carb
clamps
hardware
I broke the 12 rib belt on a trip and couldnt get a new one
so I got 2 6 rib belts to make it home.
Worked fine and I never took them off they are included but a few years old.
the bad
I was changing the o-ring seal for the supercharger case and the unit fell over on the bench, and chipped the impeller, its just a small chip but probaly should be replaced. The impeller was 7xx installed with a freshing up when I called ati 2 years ago.
450+ shipping the kit new is 2800 +
kit includes
headunit
billet bracket with tensioner
12 rib crank pulley
12 rib pulley
4 inch carb hat
silicon hoses for the outlet to the carb
clamps
hardware
I broke the 12 rib belt on a trip and couldnt get a new one
so I got 2 6 rib belts to make it home.
Worked fine and I never took them off they are included but a few years old.
the bad
I was changing the o-ring seal for the supercharger case and the unit fell over on the bench, and chipped the impeller, its just a small chip but probaly should be replaced. The impeller was 7xx installed with a freshing up when I called ati 2 years ago.
450+ shipping the kit new is 2800 +
Trending Topics
#9
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: miami beach fl
Posts: 1,652
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the impeller has to come from ati, i dont know where you could find a used one.
The belt can come from ati, or any place that sells parts for semis, should be abvle to get a 12 rib belt x inchs long
The belt can come from ati, or any place that sells parts for semis, should be abvle to get a 12 rib belt x inchs long
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey man I'm interested in ur procharger. Could u send me some pics to mglover9558@yahoo.com. I would like 2 get some more info on it if u could give me a call at 901-412-9558 I would really appreciate it. Thanks michael
#15
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jan 2003
Location: miami beach fl
Posts: 1,652
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
also have a paxton fuel pump, identical to the aermotive one but its blue not red, can be seen in the pictures.
A mallory boost refrenced fuel pressure regulator
and a auto meter boost/vacum guage
all 3 for 175 $
A mallory boost refrenced fuel pressure regulator
and a auto meter boost/vacum guage
all 3 for 175 $
#16
#18
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you were really interested you would leave a PM and not force him to spend money to sell stuff to you. So the rest of you shoo off. I'm buying this thing (if I can use it at low RPM with the nicked impeller ... as long as the SOB won't shatter ... why not?) and stuffing it onto the good ol' 2nd gen moneypit. Might finally give me the motivation to finally swap out the old 2.73 open rear! It's always interesting trying to put 450+ to the ground through that thing. Dang fun on the highway though.
Although I have serious doubts that the bonnet is going to fit under the hood of a 2nd gen Camaro. Hmmm..
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Although I have serious doubts that the bonnet is going to fit under the hood of a 2nd gen Camaro. Hmmm..
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just notice this has a 4" race bonnet. Yuck. That means another couple hundred bucks for something that fits under a stock hood unless you have the original bonnet? Still cheap, but would be nice...