Custom Powerdyne Kit w/ intercooler Gauging Interest
07-08-2008, 04:21 PM
#1
Launching!
Thread Starter
iTrader: (20)
Join Date: Aug 2005
Location: Allendale, Michigan
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Custom Powerdyne Kit w/ intercooler Gauging Interest As tuition time is coming up soon I have been debating selling the custom powerdyne kit we put together last fall and only driven MAYBE 2k miles?, and saving money to put towards school and ls1 in the future. This is just a gauging interest thread and I am looking to get $2600 shipped (was $3000) for this COMPLETE kit. I will give offers consideration but it is not imperative that I sell the kit so no lowballers please. It is currently still on my car but will be removed pending interest.
This kit has ran GREAT on my car and will really surprise you with the power it will give to your v6.
The only thing needed in addition to what I send will be the computer tuned for the gtp fuel injectors and to compensate for the added air to the motor.. as well as some minor modifications to the stock car based on the grayman instructions (including spark plugs). I used HPtuners to tune.
Kit will include:
-All necessary mounting brackets including our custom tensioner setup with bolt tensioner for VERY EASY tensioning of the belt, I have driven it several months with NO belt slippage.
-All piping and silicone couplers/clamps
-Powerdyne BD11A polished headunit
-5-7 PSI pulley
-ZZP Valve cover breather
-GTP fuel injectors
-Bosch BOV with bungs welded in piping
-Autometer phantom boost gauge
-MTI ls1 Clear lid (will need to cut fan shroud area for easy fitment)
-the belt I used
In addition I recently purchased a horizontal intercooler that I was going to try to fit under my car and use with this kit, it has never been installed nor did I have piping made for it but it will go with this kit if buyer desires.
build thread is here with our progress as we got to the final result: http://mifbody.com/vbulletin/showthread.php?t=11942
Youtube video after installing kit(*note I now swapped out the flex tubing for a much cleaner setup with a silicone elbow and metal pipe): http://www.youtube.com/watch?v=cV6igjpDtrA
here is a picture of the current setup as will be sold:
This kit has ran GREAT on my car and will really surprise you with the power it will give to your v6.
The only thing needed in addition to what I send will be the computer tuned for the gtp fuel injectors and to compensate for the added air to the motor.. as well as some minor modifications to the stock car based on the grayman instructions (including spark plugs). I used HPtuners to tune.
Kit will include:
-All necessary mounting brackets including our custom tensioner setup with bolt tensioner for VERY EASY tensioning of the belt, I have driven it several months with NO belt slippage.
-All piping and silicone couplers/clamps
-Powerdyne BD11A polished headunit
-5-7 PSI pulley
-ZZP Valve cover breather
-GTP fuel injectors
-Bosch BOV with bungs welded in piping
-Autometer phantom boost gauge
-MTI ls1 Clear lid (will need to cut fan shroud area for easy fitment)
-the belt I used
In addition I recently purchased a horizontal intercooler that I was going to try to fit under my car and use with this kit, it has never been installed nor did I have piping made for it but it will go with this kit if buyer desires.
build thread is here with our progress as we got to the final result: http://mifbody.com/vbulletin/showthread.php?t=11942
Youtube video after installing kit(*note I now swapped out the flex tubing for a much cleaner setup with a silicone elbow and metal pipe): http://www.youtube.com/watch?v=cV6igjpDtrA
here is a picture of the current setup as will be sold:
Last edited by redfbird99; 08-12-2008 at 02:34 PM.
