zlicious94

iTrader: (1)

Lmao! Whip your the only one left in my bolton class left to race so you better be at pir here soon when we have our grudge match night. You better slap a second sticker and turn on the a/c this time!

Mikey 97Z M6

iTrader: (37)

I'm hoping the Tahoe will be running the same times as the "bolt on" class this year.

Mike

*02WS6TURK*

iTrader: (13)

Nice man! Looking forward seeing you back at the track.

If anyone is interested, Sunday early afternoon a few of us are cruising to Hood River for lunch and some rolls Mike, come with. I will treat you to a NY Sub in H.R.

Mikey 97Z M6

iTrader: (37)

Thanks man, I'd love to roll out there. I have a ton of stuff to do this weekend before I leave on vacation the following week. When are you going? Can text me if ya prefer.

Mike

Meangreen1

iTrader: (2)

Looking for anyone who can help me with my wiring for my 70 Chevelle, LS1/4L60e. I had a company do the harness but wont start without bridging the starter. I live just outside portland, east side. PM me if you can help. text, PM or email, or even swing by. Let me know. I think it has something to do with chevelle body harness. PM me for details.

actrite80

iTrader: (2)

I'm down to go

Nathan

i'll probably do PIR saturday night. see about getting some baseline runs in

sunday i was thinking about checking the vintage drags at woodburn

actrite80

iTrader: (2)

Is this still a go

Nathan

time for mods.
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'

wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins

Mikey 97Z M6

iTrader: (37)

I take it that was w street tires, no drag radials or anything? Do the G8's share the the same rear suspension as the GTO? If so, I think they are notorious for weak bushings back there. Let the mods begin man!!

Mike

actrite80

iTrader: (2)

Wow did better then my V1 I ran 13.6 @105 2.3 60' wheel hopped all the way haven't been back since most of my rear bushings have been replaced
Good job man

Nathan

yep, full stock everything. pretty much hotlapped, since the car didn't really cool down much.

and the IRS feels the same as the GTO, but i don't remember having as bad wheel hop with it. could pull 1.9 60s in my GTO at woodburn

my brakes were faded on my last run, so i guess those are on my list too

*02WS6TURK*

iTrader: (13)

That's about where I was. Mine bone stock on streets did 13.1 at 109. My 60 was terrible. Average was 2.4-2.6. I'm looking forward to see what it's got now.

Mikey 97Z M6

iTrader: (37)

When are you going to run it again?

Mike

*02WS6TURK*

iTrader: (13)

Hopefully in July sometime. For sure this summer though. I'm waiting to go when Tyler, Dave, Phil, James and my buddy John all go together.

78_elky

Finally some good news on my LS swap!
I have heads and an intake that actually fit together
Still needs a few (probably more like a ton) things and I'll have to go through the bottom end of the engine but I had to set it kind of together to give me some hope.

They're LS3 Heads and a stock intake
Jessica

*02WS6TURK*

iTrader: (13)

Nice! LS FTW. Everything else takes the backseat. What are the cam specs and what heads did you go with?

78_elky

No cam yet, so no specs. The heads are 823 castings with new PRC .675 spings and Ti retainers. I got them with all the rockers, pedestals, and TSP 7.4 pushrods.

I still have to figure out all the accessories and small stuff for the engine and the fuel system on the car...I have a ton left to figure out but at least its getting closer and things are definitely on the back burner so I can keep collecting parts.
Jessica

Mikey 97Z M6

iTrader: (37)

Nice. Is this for the Elky in your Sig? Any HP goals for this one?

Mike

Mikey 97Z M6

iTrader: (37)

Sweet. Let me know when this happens and I will come down there to spectate. How was the cruise on Sunday. Looked like good weather for it.

Mike