WTB air pump
WTB air pump Anyone in King Co. or general vicinity have an air pump they took off that they want to sell? (It's for a 2000, don't know if they're different for other years.)
10 Second Club
Joined: Mar 2004
Posts: 1,491
Likes: 1
From: norfolk va
Originally Posted by 99LSS1
Yea Right Mark. 
You have been saying that for how long now. I'll bet you are going to take you're EGR off as well. 
I will believe it when I see it. 
You have been saying that for how long now. I'll bet you are going to take you're EGR off as well. I will believe it when I see it. 
Hey mark you might be able to get in the 11's, with that much weight loss. 
OK, so sell him yours sardog. Or did you break that out into 500 pieces ripping it out too? 
Mine IS coming out. REALLY! I figure when the tall valve covers go on, the PCV, EGR & AIR will come off. 1 I don't think there will be room for all that crap, 2 it will only cover up those pretty new pieces, and 3 it aint needed....just adds 20lbs & doesn't accomplish much.
PS I ordered the block off plates yesterday (all polished of course)
Mine IS coming out. REALLY! I figure when the tall valve covers go on, the PCV, EGR & AIR will come off. 1 I don't think there will be room for all that crap, 2 it will only cover up those pretty new pieces, and 3 it aint needed....just adds 20lbs & doesn't accomplish much.
PS I ordered the block off plates yesterday (all polished of course)
Originally Posted by WAHUSKER
I'm about to pull mine off my 00 TA. What's it worth to you?
TECH Veteran
Joined: Aug 2003
Posts: 4,954
Likes: 1
From: Kent WA
Just out of curiousity, why do you need the AIR pump for emissions? Are you throwing an AIR pump code because it's gone? You could always have the code deleted, and then you'll pass the OBDII scan if that's what you're worried about. As long as you don't throw codes, you'll pass... they don't even pop the hood.
Trending Topics
Originally Posted by Tranzor_Z28
Just out of curiousity, why do you need the AIR pump for emissions? Are you throwing an AIR pump code because it's gone? You could always have the code deleted, and then you'll pass the OBDII scan if that's what you're worried about. As long as you don't throw codes, you'll pass... they don't even pop the hood.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
12 Second Club
Joined: Jul 2004
Posts: 2,923
Likes: 0
From: Lynnwood, WA
From what i've been told the AIR pump just heats the cats up a lil faster on initial warm up. Mine's getting the axe next weekend. but it wouldn't be any use to you cuz it's already fried. My block off plates should be here tomorrow
I have HP Tuner for 00s Pat....I can delete that DTC....excuse me, turn it off for you. I'm going to be in the Totem Lake area Friday night (@ Steve Goodwins house) and I was bringing the laptop to clear a code for Steve.
Mark
Mark
10 Second Club
Joined: Mar 2004
Posts: 1,491
Likes: 1
From: norfolk va
Originally Posted by WAHUSKER
OK, so sell him yours sardog. Or did you break that out into 500 pieces ripping it out too?
Mine IS coming out. REALLY! I figure when the tall valve covers go on, the PCV, EGR & AIR will come off. 1 I don't think there will be room for all that crap, 2 it will only cover up those pretty new pieces, and 3 it aint needed....just adds 20lbs & doesn't accomplish much.
PS I ordered the block off plates yesterday (all polished of course)
Mine IS coming out. REALLY! I figure when the tall valve covers go on, the PCV, EGR & AIR will come off. 1 I don't think there will be room for all that crap, 2 it will only cover up those pretty new pieces, and 3 it aint needed....just adds 20lbs & doesn't accomplish much.
PS I ordered the block off plates yesterday (all polished of course)
TECH Veteran
Joined: Aug 2003
Posts: 4,954
Likes: 1
From: Kent WA
yeah, having to worry about the dtc is a pain... my tune pretty much got rid of oh, about 60% of the dtcs in the computer. I swear my PCM has enough empty memory space now I could get on the internet and download **** with it.
I have one sitting in my shed you can have. I'll take 25 for it. You just have to come and pick it up. I just need to remember what it looks like to find it. I know I have it but it was one of the first things to get the axe when I started modding the car.
12 Second Club
Joined: Jul 2004
Posts: 2,923
Likes: 0
From: Lynnwood, WA
Originally Posted by NataSS Inc
I have one sitting in my shed you can have. I'll take 25 for it. You just have to come and pick it up. I just need to remember what it looks like to find it. I know I have it but it was one of the first things to get the axe when I started modding the car.
