Well I got the headers on............
Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
Well I got the headers on............ Damn this car sounds nice. The mpegs I have don't do it justice. Its loud..........just the way I like it!! 
If someone can show me how to post, I have before and after mpegs of my car Idling and revving.
I was rushed at the shop and didn't have time to take pictures or take any mpegs there. I had to get in do the work and get out by 3pm. It only took me and my buddy 4-4 1/2 hours to do the whole thing. Not too shabby if you ask me.
However, it was giving me some trouble on the way home. A couple of times it stuttered at 3000rpm (wanting to die) and didn't want to go higher, then it would snap to life hard at about 4000rpms. Its fine now, did it about 3 or 4 times.
I think the computer is trying to adjust to them. I'm gonna need to tune this car soon.
Know if I can just get a nice dry day......
If someone can show me how to post, I have before and after mpegs of my car Idling and revving. I was rushed at the shop and didn't have time to take pictures or take any mpegs there. I had to get in do the work and get out by 3pm. It only took me and my buddy 4-4 1/2 hours to do the whole thing. Not too shabby if you ask me.
However, it was giving me some trouble on the way home. A couple of times it stuttered at 3000rpm (wanting to die) and didn't want to go higher, then it would snap to life hard at about 4000rpms. Its fine now, did it about 3 or 4 times.
I think the computer is trying to adjust to them. I'm gonna need to tune this car soon.Know if I can just get a nice dry day......
Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
Originally Posted by 00Vette
However, it was giving me some trouble on the way home. A couple of times it stuttered at 3000rpm (wanting to die) and didn't want to go higher, then it would snap to life hard at about 4000rpms.
I could of swore I told him how to put them in correctly. Now, I have to get under there and un-cut all the zip ties I did and re-route the sensors, then re-zip tie all the wires away from the headers. At least I know why it was sputtering now. 
Gettig under a lowered Vette isn't fun either. I'll have to make a better ramp............damn this sucks!!Its because the damn shop started to rush us.
Launching!
Joined: Jun 2005
Posts: 215
Likes: 0
From: The Rock
Originally Posted by 00Vette
Can anyone give me some guidance on how to post up the MPEGs I have?
You can upload it to www.putfile.com
You can also upload it here I've seen, though I've never done it here before.
Congrats.
Trending Topics
Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
Originally Posted by Robert56
Hey Jon, you can do it under my carport if ya want, and use floor jack and stands if that helps ya any? glad you got it done.
Robert
Robert
When I get it done, if I don't do it at your place, I'd like to show you it. Man does it sound nice............loud, but nice!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
You call that loud........You must not have heard an LS1 with TD's and Sweet Thunders! Kidding, that sounds badass. I need to hear it in person. I bet that opens up your power quite a bit along with those 3.90's. Hopefully next summer I can make it up there for a visit and really hear it. I can imagine it is way louder than the video suggests, especially with that cam. Love it man, can't wait to see some new times.
Kidding, that sounds badass. I need to hear it in person. I bet that opens up your power quite a bit along with those 3.90's. Hopefully next summer I can make it up there for a visit and really hear it. I can imagine it is way louder than the video suggests, especially with that cam. Love it man, can't wait to see some new times. 
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Hehe alot louder then the last time I heard it 
Sounds good
Just remember to hit the right jacking points Next time I make an LG order (I sell them now) I am getting a set of pucks
Sounds good
Just remember to hit the right jacking points
Next time I make an LG order (I sell them now) I am getting a set of pucks Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
Originally Posted by TwoFast4Lv
Hehe alot louder then the last time I heard it
Sounds good
Just remember to hit the right jacking points Next time I make an LG order (I sell them now) I am getting a set of pucks
Sounds good
Just remember to hit the right jacking points
Next time I make an LG order (I sell them now) I am getting a set of pucks Good Idea.........I just used a block of wood. I got the 02 sensors put on correctly now. No studdering at all.
Now if the weather would just cooperate. Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
Originally Posted by 99Hawk262
You call that loud........You must not have heard an LS1 with TD's and Sweet Thunders! Kidding, that sounds badass. I need to hear it in person. I bet that opens up your power quite a bit along with those 3.90's. Hopefully next summer I can make it up there for a visit and really hear it. I can imagine it is way louder than the video suggests, especially with that cam. Love it man, can't wait to see some new times.
Kidding, that sounds badass. I need to hear it in person. I bet that opens up your power quite a bit along with those 3.90's. Hopefully next summer I can make it up there for a visit and really hear it. I can imagine it is way louder than the video suggests, especially with that cam. Love it man, can't wait to see some new times.Like I said before.........this mpeg does not do this car justice. I wish you could hear it in person, especially at WOT.
Now for some nitrous and a bigger cam........ 
Originally Posted by 00Vette
Thanks Robert. I have 2 jack stands and a jack, I just have to get it up on a ramp to fit the jack underneith it. Plus, I'm scared to drive it with the 02 wires crossed like that. I know its not a big deal! Do you have a low profile jack? Mine is a normal sized craftsman and isn't lowered car freindly.
When I get it done, if I don't do it at your place, I'd like to show you it. Man does it sound nice............loud, but nice!
When I get it done, if I don't do it at your place, I'd like to show you it. Man does it sound nice............loud, but nice!
Robert