Short or Long Block needed
Short or Long Block needed I've been playing with some different stuff (on other boards) and got a pm asking if I could check anywhere possible for this. PM me if you have a lead. No, it isn't for anyone that runs local of course but the person asking is true blue, not scam crap.
This is the pm I got:
The guy looking for a block is just getting his feet wet and doesn't have a huge budget, he's done some impressive runs so far, would hate to see him get held up for too long. There is no competition here so if you know - post up 
This is the pm I got:
A close friend of mine in Vegas just called me and said he had a valve break off his motor and it chewed the **** out of the block and the valve is now permanently affixed to the cyl head. Basically he needs a new motor. This guy doesnt know anything about these cars he just loves his '01 WS6. The shop that looked at the car wants 13K to put a new motor in it for him. His response was "let me call my buddy that wrenches on these cars and see what he says".
So I need to try and locate him either a short or a long block. Hes not looking to spend anything over 3K for this and would prefer to keep it under that if possible. He has offered to fly me to vegas and foot my bill for everything if I come down and install the motor for him.
So if you guys have a line on anything, PLEASE post up and let me know what you have. He isnt worried about getting a motor shipped to him so it doesnt matter where its at (unless its nova scotia or some **** WAAAAY out there).
Let me know guys.
So I need to try and locate him either a short or a long block. Hes not looking to spend anything over 3K for this and would prefer to keep it under that if possible. He has offered to fly me to vegas and foot my bill for everything if I come down and install the motor for him.
So if you guys have a line on anything, PLEASE post up and let me know what you have. He isnt worried about getting a motor shipped to him so it doesnt matter where its at (unless its nova scotia or some **** WAAAAY out there).
Let me know guys.
Originally Posted by TwoFast4Lv
You can buy a Brand new 345hp 6.0L for under $4k ready to drop in with injectors and all.
OR you can buy the one Don has for about half
OR you can buy the one Don has for about half
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
