Time to plan...
#21
TECH Veteran
iTrader: (3)
Join Date: Feb 2004
Location: Lynnwood, WA (North of Seattle)
Posts: 4,729
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by WAHUSKER
Mine is an LS1 motor cuz I didn't want to change everything over. I forget now what it cost, but it can be rather involved.
And no, stock heads won't do a 408 with a BIG cam justice. You could put $1k into them (porting & polishing, valves, etc) to make them work....
And don't take this wrong, but what you're talking about doing takes a lot of knowledge. I know a fair amount about cars and I needed help. Things like degreeing a cam, setting the valve train up properly, installing a clutch that will hold up to this much power, tuning.....you're gonna need help, so plan for that part of the budget too.
And no, stock heads won't do a 408 with a BIG cam justice. You could put $1k into them (porting & polishing, valves, etc) to make them work....
And don't take this wrong, but what you're talking about doing takes a lot of knowledge. I know a fair amount about cars and I needed help. Things like degreeing a cam, setting the valve train up properly, installing a clutch that will hold up to this much power, tuning.....you're gonna need help, so plan for that part of the budget too.
And on a serious note, good luck with whatever decision you make Josh.
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
#24
TECH Veteran
iTrader: (3)
Join Date: Feb 2004
Location: Lynnwood, WA (North of Seattle)
Posts: 4,729
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by HitmanLSX
thanks guys that's why i posted the questions up. now to just get a daily and save up to get it done or find another way to finance it.
#25
12 Second Club
Thread Starter
Join Date: Jul 2004
Location: Lynnwood, WA
Posts: 2,923
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
not yet... I'm gonna have Amorget reset the tune unless I can get ahold of ryan (VtecThis) and borrow his HP Tuner so i can do some logging and track down the problem. Anyone have a leak down tester?