CME Fender Help! 
CME Fender Help!
Thread Starter
On The Tree
Joined: Jun 2008
Posts: 166
Likes: 0
From: Wake Forest,NC
Teching In
Joined: Mar 2009
Posts: 17
Likes: 0
on the fender there shoud be some place where the bumper slides into a bracket or is fastened in some fashion. you dont want to use glue because there needs to be some flex between bumper and fender due to the differance in material. i guess you could use double sided tape but i wouldnt doubt it if it didnt last but a week or two. There should be some sort of physical connection i.e. bracked, nut-bolt ect.
Thread Starter
On The Tree
Joined: Jun 2008
Posts: 166
Likes: 0
From: Wake Forest,NC
on the fender there shoud be some place where the bumper slides into a bracket or is fastened in some fashion. you dont want to use glue because there needs to be some flex between bumper and fender due to the differance in material. i guess you could use double sided tape but i wouldnt doubt it if it didnt last but a week or two. There should be some sort of physical connection i.e. bracked, nut-bolt ect.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
vhb double stick tape. They use that stuff to hold aluminum panels on the side of skyscrappers, it will hold for you. Its the same stuff that holds most emblems and moldings on cars.
