Screwed or able to fix?
#1
On The Tree
Thread Starter
iTrader: (12)
Join Date: Mar 2007
Location: NYC
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Couple days ago I was leaving the local Taco Hell and wasn't paying attention to where the curb started and I came out and fell hard on the pass side side skirt (i know its not a skirt but dont know what to call it??) and now its pretty banged up. Is there a piece they sell for this or its pretty much screwed? ![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
![](http://i26.photobucket.com/albums/c141/topgunner14/paint.png)
Last edited by IROCthisZ28forLife; 06-22-2010 at 09:29 PM.
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I would try to pull as much of it as I can out using some kind of dent puller and it'll have to have some body filler. If you paint it, you'll want to do some kind of guide coat to make sure everything is even because sometimes you can pull dents out too far and they need to be tapped back down a bit.
#5
TECH Regular
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
actually yes they do have a replacement rocker sill panel for it...just had an insurance claim done for that same thing last week on my car ...only diff is my fender also broke on bottom......i can say though had mine pulled out and it only took mudd to pretty much fill in the whooles made by pulling it out