Info on front fender flares.
03-15-2015, 03:32 PM
#1
On The Tree
Thread Starter
Join Date: Oct 2007
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Info on front fender flares. I've been searching and searching but can't find anything. I know I've seen pics on here before, I'm talking about the rivet on flares, ive seen pics of them on track cars/ autocross cars. I'm trying to find more pics or info on them.
I'm looking to widen my front fender, but because the plastic I'm not sure how to go about it.
I'm looking to widen my front fender, but because the plastic I'm not sure how to go about it.
03-16-2015, 10:12 PM
#4
On The Tree
Thread Starter
Join Date: Oct 2007
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
He did use Maier Racing 69 Mustang Rear flares for both the front and rear flares on his car. He cut them down to fit. It is not perfect but close enough, with some patience an glass it could look clean. For those who wish to do this, here is the info
http://www.maierracing.com
Part#MF69RF3 they are not cheap 375 a pair, you need 2 set per car.
I am still a few months out before I can do it myself (Want to have the rims tires first).
Wow, that was easy..... Now to get it DONE. I plan on running 315 front and 355 rear.. Now that I know it can be done, time to look at options.
http://www.maierracing.com
Part#MF69RF3 they are not cheap 375 a pair, you need 2 set per car.
I am still a few months out before I can do it myself (Want to have the rims tires first).
Wow, that was easy..... Now to get it DONE. I plan on running 315 front and 355 rear.. Now that I know it can be done, time to look at options.
