Gun Metal Gre" PlastiDip " for WS6 ( HELP with Color match.....
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Gun Metal Gre" PlastiDip " for WS6 ( HELP with Color match.....
Hi,
I have attached a few pictures of the color I am wanting to have my WS6 Plasti-Dipped with.
I just can't figure out what Color this is ?
And what Color of Plasti-Dip does this Color most resemble, if for some reason they do Not make this color in a Plasti-Dip color ?
Do I need to go with .... a Flat, Satin or Gloss ( Mixed with the Plasti-Dip ) to achieve the color as seen in the attached photos ?
Thanks so much,
I really appreciate the help and insight - Michael
I have attached a few pictures of the color I am wanting to have my WS6 Plasti-Dipped with.
I just can't figure out what Color this is ?
And what Color of Plasti-Dip does this Color most resemble, if for some reason they do Not make this color in a Plasti-Dip color ?
Do I need to go with .... a Flat, Satin or Gloss ( Mixed with the Plasti-Dip ) to achieve the color as seen in the attached photos ?
Thanks so much,
I really appreciate the help and insight - Michael
#4
TECH Fanatic
iTrader: (6)
If that indeed a PD color, closest I can think of is Anthracite Gray with a TON of Glossifier. But I'm pretty sure that's paint on pictures your posted.
BTW you don't mix Glossifier with the PD when you spray it, it sprays on top. Go check out DYC site and forum, you could definitely find an answer there. You could also mix colors to achieve desired color.
BTW that car with that color and polished wheels looks sick.
BTW you don't mix Glossifier with the PD when you spray it, it sprays on top. Go check out DYC site and forum, you could definitely find an answer there. You could also mix colors to achieve desired color.
BTW that car with that color and polished wheels looks sick.
#5
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
InfiniteReality,
Thank you for your reply
Yeah, it's definitely paint on the WS6 I posted .
I had the Color of it written down about 1 year ago.... I just can't find the paper that I wrote it down on lol
And is the Glossifier when used with PlastiDip... basically the equivalent of Clear Coat on an Actual Paint job on a car ?
And how many coats of Glossifier do you think I'd need to achieve that same Shine as is in the picture of the WS6 ?
And yeah , I really like this color on a Trans Am too
Just hope I can find the name of the Color ..... It looks like it's a mixture of both Grey and maybe a Military type Green .... What do you think ?
And Thanks again for your input, much appreciated
Thank you for your reply
Yeah, it's definitely paint on the WS6 I posted .
I had the Color of it written down about 1 year ago.... I just can't find the paper that I wrote it down on lol
And is the Glossifier when used with PlastiDip... basically the equivalent of Clear Coat on an Actual Paint job on a car ?
And how many coats of Glossifier do you think I'd need to achieve that same Shine as is in the picture of the WS6 ?
And yeah , I really like this color on a Trans Am too
Just hope I can find the name of the Color ..... It looks like it's a mixture of both Grey and maybe a Military type Green .... What do you think ?
And Thanks again for your input, much appreciated
#7
TECH Fanatic
iTrader: (6)
Yep Glossifier is just like clear coat. As far as how many coats, that I'm not sure. More coats the more shiny it will be. I'm not sure if you can achieve paint like clear coat, but can get close.
If I was you, I'd get both colors you suggested and take the bulk of the gray and slowly add the camo green till it is what you like. WIth dip, what color you see wet is the color it'll look afterwards.
http://www.dipyourcar.com/forums/forum.php
Check out DYC forums. Sign up and ask questions and read. People there more than willing to help and guide you. Also check out DYC youtube channel, he'll show you how it's done and step-by-step. Beware though, it'll get you all hyped up to dip. That's how my bike got dipped twice so far and the truck once (and still is 7 months later).
If I was you, I'd get both colors you suggested and take the bulk of the gray and slowly add the camo green till it is what you like. WIth dip, what color you see wet is the color it'll look afterwards.
http://www.dipyourcar.com/forums/forum.php
Check out DYC forums. Sign up and ask questions and read. People there more than willing to help and guide you. Also check out DYC youtube channel, he'll show you how it's done and step-by-step. Beware though, it'll get you all hyped up to dip. That's how my bike got dipped twice so far and the truck once (and still is 7 months later).
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
InfiniteReality,
I'm thinking of doing the following ......Mixing a 50/50 mix of Anthracite and Gunmetal. Figure 3 gallons of gunmetal gray for the base and then 2 gallons of the 50/50 mix plus the Camo Green
Maybe Per 1 Gallon of the Anthracite and Gunmetal .... mik these 50/50 and add to that .... 1/2 a pint ( At first ) and see what that looks like
And then add another 1/2 pint of the Camo Green until I get the color I'm looking for.
You think?
Thank
I'm thinking of doing the following ......Mixing a 50/50 mix of Anthracite and Gunmetal. Figure 3 gallons of gunmetal gray for the base and then 2 gallons of the 50/50 mix plus the Camo Green
Maybe Per 1 Gallon of the Anthracite and Gunmetal .... mik these 50/50 and add to that .... 1/2 a pint ( At first ) and see what that looks like
And then add another 1/2 pint of the Camo Green until I get the color I'm looking for.
You think?
Thank
#9
TECH Fanatic
iTrader: (6)
I think you're going in the right direction, makes sense to me. Just take your time mixing and mix ALL of your dip for the car at the same time so you're not remixing during the spraying.
They always say rather have too much dip than not enough. It also makes it easier to peel when you're ready. For reference it took 4 gallons to dip the truck properly. I use 1 gallon to dip the front/rear bumpers, fender flares and roof. The bike took 1 gallon, though 1 extra pint would have been nice to make it a little easier to peel.
They always say rather have too much dip than not enough. It also makes it easier to peel when you're ready. For reference it took 4 gallons to dip the truck properly. I use 1 gallon to dip the front/rear bumpers, fender flares and roof. The bike took 1 gallon, though 1 extra pint would have been nice to make it a little easier to peel.
#10
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
How many Coats of Plastidip did you apply to your truck, and do you happen to have any Pics. ?
How long would you say The PlastiDip lasts .... If taken care of ( washed and applying a Wax type spray such as Turtle Wax's I.C.E. spray on it, every few weeks ?
I have heard up to 3 years
And to keep it looking it's best ... you can always have it Re-Dipped wit one coat of paint + how ever many coats of High Gloss coating
I did the CETA mod to my WS6 over 2 and a half years ago , and it is still holding up well ( not to mention this is right above the Exhaust pipes ) .... So definitely some durable and long lasting stuff
How long would you say The PlastiDip lasts .... If taken care of ( washed and applying a Wax type spray such as Turtle Wax's I.C.E. spray on it, every few weeks ?
I have heard up to 3 years
And to keep it looking it's best ... you can always have it Re-Dipped wit one coat of paint + how ever many coats of High Gloss coating
I did the CETA mod to my WS6 over 2 and a half years ago , and it is still holding up well ( not to mention this is right above the Exhaust pipes ) .... So definitely some durable and long lasting stuff
#11
TECH Fanatic
iTrader: (6)
I used 4 gallons of blue and 1 gallon of black. The front/rear bumpers, roof and fender flares are black. I've had it on the truck since July and honestly hadn't even washed it once and still holding up. I'm not totally sure how long it'll last, most people end up peeling it and doing it again with a different color, lol.
Here's a few pictures of my dipping. I actually don't have pictures with the black fender flares on the truck, I came back and did that a week later and never took pics.
Here's a few pictures of my dipping. I actually don't have pictures with the black fender flares on the truck, I came back and did that a week later and never took pics.
#14
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the tip ..... I wasn't aware of the DipCoat spray
I'll look into that as a possible alternative to the High Gloss
Do you happen to have any more pics. of your WS6 ?
Have you done any Exterior Mods to it .... Overlays, decals, stripes ?
I'll look into that as a possible alternative to the High Gloss
Do you happen to have any more pics. of your WS6 ?
Have you done any Exterior Mods to it .... Overlays, decals, stripes ?
#15
TECH Fanatic
iTrader: (6)
DipCoat is well worth the money, last a long time as well too. I'd consider it a must have when you do it. It definitely wouldn't replace Glossifier, but when freshly applied it goes from a flat color to more of a satin. But you'd have to keep applying it. If you're wanting shine, definitely do Glossifier. I'm not sure why but the DYC forum is still down. When that comes back up, definitely recommend spending some time on it... it's amazing the work everyone does. Mine is average at best.
You may be interested in seeing my time lapse. Gives you an idea what I did to dip the bike this last time.
and to remove the dip
I'd be glad to post pictures of my WS6, but it's fairly stock looking right now. Most I've done is lower it, overlay over some black emblems and upgraded some lighting with LEDs. I have a set of 01-02 WS6 wheels, just mailed 2 of them yesterday to get widened from 9" to 11". Can't wait to get those back.
https://ls1tech.com/forums/appearanc...l#post19124186
I made this over the weekend, it's pretty unique, lol.
https://ls1tech.com/forums/appearanc...ate-light.html
You may be interested in seeing my time lapse. Gives you an idea what I did to dip the bike this last time.
I'd be glad to post pictures of my WS6, but it's fairly stock looking right now. Most I've done is lower it, overlay over some black emblems and upgraded some lighting with LEDs. I have a set of 01-02 WS6 wheels, just mailed 2 of them yesterday to get widened from 9" to 11". Can't wait to get those back.
https://ls1tech.com/forums/appearanc...l#post19124186
I made this over the weekend, it's pretty unique, lol.
https://ls1tech.com/forums/appearanc...ate-light.html
#16
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Awesome videos man .... It's cool to see the Lapse and progress from the starting point , and up until the end
I like the LED project you did for the License Plate ..... s that controlled with a Switch and or a Dimmer ?
And have you ever tinkered with Making the Front of the Bird on the License plate " Light Up " with the use of LEDs ?
I've seen a few of these, and I really like the look to them .
Just haven't found anyone who sells them yet, or I'd have had one already lol
And your WS6 is identical to mine ( for the time being )
I just ordered a set of Eibach Sportlines for the Front and Back ( and Koni shocks/struts for the front )
Definitely looking forward to lowering it , and giving it that Aggressive stance
Next up will be to PlastiDip it , which is where I'm stuck on what color to go with .... Anthracite, Gun Metal or an Artic White ( same as original color of the car )
I'm also considering putting on certain Overlays and Inlays on various places on my car .... Just not sure exactly which I want to go with OR what color to use ,
Here is the Link to that Thread ......
https://ls1tech.com/forums/appearanc...-overlays.html
If I keep the car white, then I'm leaning towards going with ONYX color for ,
your thoughts ?
And what do you think about putting the BlackBird stripes on Both the Hood and or the Spoiler ?
Here's the Link for those.....
http://fourthcircledesigns.com/index...63efa167794605
I like the LED project you did for the License Plate ..... s that controlled with a Switch and or a Dimmer ?
And have you ever tinkered with Making the Front of the Bird on the License plate " Light Up " with the use of LEDs ?
I've seen a few of these, and I really like the look to them .
Just haven't found anyone who sells them yet, or I'd have had one already lol
And your WS6 is identical to mine ( for the time being )
I just ordered a set of Eibach Sportlines for the Front and Back ( and Koni shocks/struts for the front )
Definitely looking forward to lowering it , and giving it that Aggressive stance
Next up will be to PlastiDip it , which is where I'm stuck on what color to go with .... Anthracite, Gun Metal or an Artic White ( same as original color of the car )
I'm also considering putting on certain Overlays and Inlays on various places on my car .... Just not sure exactly which I want to go with OR what color to use ,
Here is the Link to that Thread ......
https://ls1tech.com/forums/appearanc...-overlays.html
If I keep the car white, then I'm leaning towards going with ONYX color for ,
your thoughts ?
And what do you think about putting the BlackBird stripes on Both the Hood and or the Spoiler ?
Here's the Link for those.....
http://fourthcircledesigns.com/index...63efa167794605
#18
TECH Fanatic
iTrader: (6)
Awesome videos man .... It's cool to see the Lapse and progress from the starting point , and up until the end
I like the LED project you did for the License Plate ..... s that controlled with a Switch and or a Dimmer ?
And have you ever tinkered with Making the Front of the Bird on the License plate " Light Up " with the use of LEDs ?
I've seen a few of these, and I really like the look to them .
Just haven't found anyone who sells them yet, or I'd have had one already lol
And your WS6 is identical to mine ( for the time being )
I just ordered a set of Eibach Sportlines for the Front and Back ( and Koni shocks/struts for the front )
Definitely looking forward to lowering it , and giving it that Aggressive stance
Next up will be to PlastiDip it , which is where I'm stuck on what color to go with .... Anthracite, Gun Metal or an Artic White ( same as original color of the car )
I'm also considering putting on certain Overlays and Inlays on various places on my car .... Just not sure exactly which I want to go with OR what color to use ,
Here is the Link to that Thread ......
https://ls1tech.com/forums/appearanc...-overlays.html
If I keep the car white, then I'm leaning towards going with ONYX color for ,
your thoughts ?
And what do you think about putting the BlackBird stripes on Both the Hood and or the Spoiler ?
Here's the Link for those.....
http://fourthcircledesigns.com/index...63efa167794605
I like the LED project you did for the License Plate ..... s that controlled with a Switch and or a Dimmer ?
And have you ever tinkered with Making the Front of the Bird on the License plate " Light Up " with the use of LEDs ?
I've seen a few of these, and I really like the look to them .
Just haven't found anyone who sells them yet, or I'd have had one already lol
And your WS6 is identical to mine ( for the time being )
I just ordered a set of Eibach Sportlines for the Front and Back ( and Koni shocks/struts for the front )
Definitely looking forward to lowering it , and giving it that Aggressive stance
Next up will be to PlastiDip it , which is where I'm stuck on what color to go with .... Anthracite, Gun Metal or an Artic White ( same as original color of the car )
I'm also considering putting on certain Overlays and Inlays on various places on my car .... Just not sure exactly which I want to go with OR what color to use ,
Here is the Link to that Thread ......
https://ls1tech.com/forums/appearanc...-overlays.html
If I keep the car white, then I'm leaning towards going with ONYX color for ,
your thoughts ?
And what do you think about putting the BlackBird stripes on Both the Hood and or the Spoiler ?
Here's the Link for those.....
http://fourthcircledesigns.com/index...63efa167794605
I just did springs, BMR. I also added 1/4" spacers so I got a 1" drop and not 1.25". I really liked the way the Firehawk sat on the old version of BMR so repeating it. With the Firehawk I originally tried Eibach. I HATED them, it slammed the car 2x further than advertised and it rode like a donkey. They told me it was my car, haha. Exchanged for BMR and was perfect and rode way better. Just my .02.
I've illuminated the front bird it once before, but it was about 10yrs ago. I'll post some pictures at the very bottom. Don't recall off the top of my head how many LEDs I used, but they always worked till the day I sold it. Bear with the pictures, they're not the best, lol. Check out 6LE, I think they make one. I know someone does, I saw it not long ago.
I don't mind the side stripes or the blackbird spoiler stripes, but not something I want on my car. My brother has identical car and has them though.
As far as decals. My preference is only front bird and rear Pontiac inlay, in ABS or the onxy SS... no decals for rear, the inserts would be better.
A cool color would be a gray with a bronze undertone. I think that'd be awesome looking. Could likely add pearl to the gray they have to achieve the look and add some pop to the color.
before bird overlay
after
#19
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
TWO Black WS6's ..... Think of getting mine Plastidipped Black instead of white , and then doing the wheels in a Darker Grey ( Gunmetal ) as seen in the picture(s) .
Thoughts please ?
Thoughts please ?