Orange Peel...
#21
Launching!
iTrader: (1)
Join Date: Jan 2007
Location: Bay City, Mi.
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i used spies, never liked it, used ici never liked it, du pont hate it, PPG is my favorite and has been for the past 15 yrs, what i do from time to time, is apply 2 coats of clear, sand with 1,000, and re clear, i wait 2 days my self, sand with 1,500 and buff
if you ever used ppg`s dbc system you know that the base coat mixed with dx57 in my opinion is one of the best base coats that lay down flat, and the ncs sealer also lays down flat, those steps also help allot in a good paint job
i have my own way and it works for me and i have had no complaints
if you ever used ppg`s dbc system you know that the base coat mixed with dx57 in my opinion is one of the best base coats that lay down flat, and the ncs sealer also lays down flat, those steps also help allot in a good paint job
i have my own way and it works for me and i have had no complaints
And the only time I do any sanding on by basecoat is if there is dirt, fisheye, ect.. Then I recoat with basecoat then clear coat. You wet sand out the orange peal in the clear and buff. If your getting that bad of orange peal in your base then your gun isn't set up right or your using too fast of a reducer in your base.
Last edited by cvalliere; 04-16-2008 at 07:18 PM. Reason: needed to add to my post