Nitrous Set-up complete...New $285 shipped!!
#1
Nitrous Set-up complete...New $285 shipped!!
UPDATE!!!!
Dyno tune kit for sale...$285 ship[ed
Pictures are of both hsw kit and dyno tune kit...
If you go to the dynotunenitrous.com web site there you will find my EXACT dry 75-150hp Dry nitrous kit.
Kit is brand new with instructions and receipt
Dyno tune kit for sale...$285 ship[ed
Pictures are of both hsw kit and dyno tune kit...
If you go to the dynotunenitrous.com web site there you will find my EXACT dry 75-150hp Dry nitrous kit.
Kit is brand new with instructions and receipt
Last edited by Kyle Dean; 12-15-2009 at 08:25 PM.
#4
Everything Is brand new the only thing I did was install the bottle and blow through kit and never got around to anything else.
I live in seatac wa
The dynotune Kit is the full ls1 75/150 dry hp kit ready to use. Its on the dyno tune website but here is a parts list also.
>10lb black poweder coated bottle with high flow valve
>stainless bottle brackets with mounting hardware
>Stainless bottle nut with teflon washer
>16 foot braided stainless feed line, blue fittings
>16 foot braided stainless feed line, blue fittings
>High Flow Nitrous and Fuel solenoids
>Solenoid mounting bracket
>2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings
>Braided stainless line for Fuel rail test port installation, red fitting
>Jets for 75, 100 and 150HP (max 175hp with diffrent jets)
>High flow Wet Nozzle
>Wet Nozzle Mounting adaptor so the Nozzle does not blow out during injection causing a fire, makes mounting the nozzle in plastic or rubber a snap!
>Nozzle tap
>5/16" fuel injection hose with clamps and brass "T", all fittings and clamps for a complete installation
>Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc..
>Micro throttle activation switch and mounting bracket
>Our 22 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for all the fuel injection applications
The harris speed works is another full kit for the ls1.. It is basically full of safety devices and other cool features. You can find it at harrisspeedworks.com under this part number...SKU: HSW-ACC-AO-KIT-4AN
Here is the parts list anyway..
1
HSW MicroEdge Nitrous Controller
1
Nitrous Bottle Heater Kit (4AN)
1
Nitrous Purge Kit (4AN) & Installation Kit
1
Nitrous Oxide Bottle Blow Down Tube Kit
1
Billet Nitrous Filter Kit