L92 Heads, Built T56 and a bunch of parts forsale
11-22-2009, 12:35 PM
#1
TECH Apprentice
Thread Starter
iTrader: (31)
Join Date: Jun 2008
Location: Edinburg, Texas
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
L92 Heads, Built T56 and a bunch of parts forsale K Guys it’s time for me to part the camaro…. I am pretty much gon be selling the bolt ons and the body as a roller. I WILL NOT BE SELLING PARTS OF THE EXTERIOR. Here’s a list of the stuff I will be selling. I will update as soon as I can and will post up some pics too.
1. FRE 92 mm Billet Throttle Body 4 Bolt Style/Cable Driven $250 Less than 200 Miles
2. L92 Heads with Dual Springs(660Max Lift) $700 Less than 200 Miles
3. Used LS1 Motor Mounts… Sold
4. (8) L92 Offset Rocker Arms, (8) Reg Rocker Arms & (2) Rocker Pedestals $80 Less than 200 Miles
5. I have all the Sensors… Sold
6. TSP Torquer v2 Cam 112LSa $200 has light scratches
7. TSP Hardened Pushrods... Sold
8. LS7 Lifter $100 Less than 200 Miles
9. LS3 Intake with Shield, Injectors & Fuel Rails.... Sold
10. Dual Stage “Nitrous Works” Kit… No Bottle/Med Solenoids $200
11. Fully Built Tremec T56 $1200 Full Swap $1500 FIRM Less than 200 Miles
12. Stock Fully Ported MAF Sensor... Sold
13. Truck Coils, bracket & harness... Sold
14. LS6 Valley $75
15. Center Bolt Valve Covers $60
16. 98 LS1, Automatic Engine Harness $220
17. Used LS7 Clutch Kit $250
18. Stainless Steel Long Tube Headers $175
19. Aluminum Driveshaft $100
20. Two Dynomax Bullets $65 Pair won’t part
21. Cable 700R4 without Tail $150 WORKS
22. LS1 Water Pump... Sold
23. F Body Alternator.... Sold
24. 98 LS1 CPU Tuned by File $75
25. F Body Power steering Pump w/Pulley & Reservoir $110
26. 1998 Camaro Z28 (Roller)Texas Blue Title Never wrecked, 2nd Owner, Hardtop w/OEM SS Hood, SS Spoiler, Full Interior, Harness for a Automatic but petals for a 6 Speed, Spohn Lower Control Arms, Edelbrock Pan Hardbar, Richmond 3:73 Gears, 02 Steeringwheel… Pretty sure I am missing something else. $4000 o.b.o or trade for a running vehicle or Sports Bike
*Will Sell Hood and Spoiler ONLY if you have a Black Stock Hood and Spoiler to put back on my car and at the right price.
I’ll update you guys if I have anything else for sale or if I sale anything. Also I am open to offer guys but don’t low ball. I am also willing to trade the 98 Camaro Roller for a running vehicle or Sports Bike. You guys can reach me anytime at (956)648-3489 or frankmarroquin@yahoo.com
1. FRE 92 mm Billet Throttle Body 4 Bolt Style/Cable Driven $250 Less than 200 Miles
2. L92 Heads with Dual Springs(660Max Lift) $700 Less than 200 Miles
3. Used LS1 Motor Mounts… Sold
4. (8) L92 Offset Rocker Arms, (8) Reg Rocker Arms & (2) Rocker Pedestals $80 Less than 200 Miles
5. I have all the Sensors… Sold
6. TSP Torquer v2 Cam 112LSa $200 has light scratches
7. TSP Hardened Pushrods... Sold
8. LS7 Lifter $100 Less than 200 Miles
9. LS3 Intake with Shield, Injectors & Fuel Rails.... Sold
10. Dual Stage “Nitrous Works” Kit… No Bottle/Med Solenoids $200
11. Fully Built Tremec T56 $1200 Full Swap $1500 FIRM Less than 200 Miles
12. Stock Fully Ported MAF Sensor... Sold
13. Truck Coils, bracket & harness... Sold
14. LS6 Valley $75
15. Center Bolt Valve Covers $60
16. 98 LS1, Automatic Engine Harness $220
17. Used LS7 Clutch Kit $250
18. Stainless Steel Long Tube Headers $175
19. Aluminum Driveshaft $100
20. Two Dynomax Bullets $65 Pair won’t part
21. Cable 700R4 without Tail $150 WORKS
22. LS1 Water Pump... Sold
23. F Body Alternator.... Sold
24. 98 LS1 CPU Tuned by File $75
25. F Body Power steering Pump w/Pulley & Reservoir $110
26. 1998 Camaro Z28 (Roller)Texas Blue Title Never wrecked, 2nd Owner, Hardtop w/OEM SS Hood, SS Spoiler, Full Interior, Harness for a Automatic but petals for a 6 Speed, Spohn Lower Control Arms, Edelbrock Pan Hardbar, Richmond 3:73 Gears, 02 Steeringwheel… Pretty sure I am missing something else. $4000 o.b.o or trade for a running vehicle or Sports Bike
*Will Sell Hood and Spoiler ONLY if you have a Black Stock Hood and Spoiler to put back on my car and at the right price.
I’ll update you guys if I have anything else for sale or if I sale anything. Also I am open to offer guys but don’t low ball. I am also willing to trade the 98 Camaro Roller for a running vehicle or Sports Bike. You guys can reach me anytime at (956)648-3489 or frankmarroquin@yahoo.com
Last edited by frankmarroquin; 11-27-2009 at 08:14 AM.
11-23-2009, 02:35 AM
#7
TECH Apprentice
Thread Starter
iTrader: (31)
Join Date: Jun 2008
Location: Edinburg, Texas
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
*Update.... Sorry guys but i just finished removing the heads and found that one of the springs cracked causing the valve on cylinder 6 to fail and to mess things up. Only one of the heads is good. i dunno if the other can be fixed or not
Trending Topics
11-24-2009, 10:11 AM
#13
TECH Apprentice
Thread Starter
iTrader: (31)
Join Date: Jun 2008
Location: Edinburg, Texas
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
This is a list of all the parts that were used in the full build process... At the bottom are the upgraded parts.
Premium Master Overhaul Kit for Borg Warner / Tremec T56 Transmission for Camaro, Firebird & Dodge Viper. Genuine OEM Tremec / Borg Warner parts - USA made!
Kit includes:
1st and 2nd three piece synchronizer rings
3rd, 4th, 5th & 6th carbon kevlar synchronizer rings
front and rear seals
Premium Timken Bearings Included:
all main shaft gear bearings
all main shaft bearings & races
all countershaft bearings & Races
input pocket bearing & race
shift fork pads
snap rings
spacers
thrust washers
front bearing preload shims
countershaft preload shims
synchronizer keys/struts
retaining springs
rear countersahft bearing oil funnel
shifter bushing
Here's the list of upgraded parts....
All Bronze fork pads
All Billet keys
3-4 Steel Shift Fork
I am trying to find the receipts in my car so that I can post the part numbers and anything I may be missing. Sorry for the wait guys but I have to log on through my cell and it slow *** hell. Thanks for you guys patience. By the way guys I really don't wanna have to ship but if you guys offers is right i'd be willing too ship it your way. Oh and just a heads up the bell housing will be included but it does have a small hairline crack.
Premium Master Overhaul Kit for Borg Warner / Tremec T56 Transmission for Camaro, Firebird & Dodge Viper. Genuine OEM Tremec / Borg Warner parts - USA made!
Kit includes:
1st and 2nd three piece synchronizer rings
3rd, 4th, 5th & 6th carbon kevlar synchronizer rings
front and rear seals
Premium Timken Bearings Included:
all main shaft gear bearings
all main shaft bearings & races
all countershaft bearings & Races
input pocket bearing & race
shift fork pads
snap rings
spacers
thrust washers
front bearing preload shims
countershaft preload shims
synchronizer keys/struts
retaining springs
rear countersahft bearing oil funnel
shifter bushing
Here's the list of upgraded parts....
All Bronze fork pads
All Billet keys
3-4 Steel Shift Fork
I am trying to find the receipts in my car so that I can post the part numbers and anything I may be missing. Sorry for the wait guys but I have to log on through my cell and it slow *** hell. Thanks for you guys patience. By the way guys I really don't wanna have to ship but if you guys offers is right i'd be willing too ship it your way. Oh and just a heads up the bell housing will be included but it does have a small hairline crack.
11-24-2009, 10:14 AM
#15
TECH Apprentice
Thread Starter
iTrader: (31)
Join Date: Jun 2008
Location: Edinburg, Texas
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Pushrods are 7.400 in Length... Comp Cams brand if i am not mistaken.
Bullets are 3" in 3" out... and they are the long ones. Not sure the size I have to double check on that.
water pump... I'll get back on this one cause i might be needing it for a lsx swap i am doing.
Bullets are 3" in 3" out... and they are the long ones. Not sure the size I have to double check on that.
water pump... I'll get back on this one cause i might be needing it for a lsx swap i am doing.
