FS: Amost complete 6.0 manifold turbo kit with extras $1000
#1
10 Second Club
Thread Starter
iTrader: (61)
Join Date: Dec 2004
Location: 20 Minutes North of ATL
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
FS: Amost complete 6.0 manifold turbo kit with extras $1000
Like the title says I have a 6.0 manifold almost complete turbo kit. This kit made a 856RWHP on my 370CI 21LBs of boost and meth. The only thing you will need for this kit is a crossover pipe made,wastegate and a 90 degree rubber elbow and its done. I used these on another kit is why I don't have them. Here is a quick rundown of what I have.
GT45 70mm on intake and 88MM on exhaust side. Makes for killer quick spool and still make the power. Turbo has less than 1500miles on it
6.0L manifolds
4in polished intercooler
Tial 50mm BOV with polished charge pipe.(bead welded as well)
Flex Lite thin puller fans (comes with ls1 6speed radiator)
Extended rediator hoses
Extended powersteering lines
QTP electric cutout on I pipe
Slowhawk alternator relocation bracket
3 inch manderal bent down pipe(for BMR tubular K frame)Gives you a ton of ground clearance
Stainless steel feedline. With oil filter adapter.
-10 Stainless drain tube
Intercooler pipes all stainless manderal bent
All clamps are T bolt clapms
Hoses are all 3-ply
There are a couple of more little things Im sure Im leaving out so just ask me if you have any questions. You can have an awsome turbo kit for under $1,500 complete. This kit is also an ease to work on. My feedback on here can speak for itself. Here are some pics below
GT45 70mm on intake and 88MM on exhaust side. Makes for killer quick spool and still make the power. Turbo has less than 1500miles on it
6.0L manifolds
4in polished intercooler
Tial 50mm BOV with polished charge pipe.(bead welded as well)
Flex Lite thin puller fans (comes with ls1 6speed radiator)
Extended rediator hoses
Extended powersteering lines
QTP electric cutout on I pipe
Slowhawk alternator relocation bracket
3 inch manderal bent down pipe(for BMR tubular K frame)Gives you a ton of ground clearance
Stainless steel feedline. With oil filter adapter.
-10 Stainless drain tube
Intercooler pipes all stainless manderal bent
All clamps are T bolt clapms
Hoses are all 3-ply
There are a couple of more little things Im sure Im leaving out so just ask me if you have any questions. You can have an awsome turbo kit for under $1,500 complete. This kit is also an ease to work on. My feedback on here can speak for itself. Here are some pics below
#6
TECH Enthusiast
Any pics installed on the car?
Trending Topics
#8
TECH Enthusiast
My guess would be its made to fit 6.0 truck manifolds.