WTS Nodular 9 inch center
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Casting number is D0OW-B. This is the one that is highly sought after. Looking to get $175 OBO (Price reduced from 200). These things go for around $400 + shipping. Center section only.
Last edited by sschoeffler; 01-06-2010 at 04:51 AM.
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is for the nodular case only. Gears + Posi + Nodular Case goes for around 1,800 according to Moser. To make this a complete third member your looking at around $400 from parts off of ebay. Grab a 9 inch housing for around 50 bucks off craigslist, pay someone around you to fab it up, in my case it cost me 200 bucks. You can have a complete 9 inch ready to bolt up for under $1000.
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its made by Ford. I can get some pics later. Ford made several different center sections made of several types of materials. This one specifically was the more rare version made from Nodular Iron. Thats why they have an N in the case. Casting is C6AW its the indestructible center case. This case will support well over 1000 horsepower.
Trending Topics
#8
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
im a ford guy and i can attest to the strength of these nodular cases,i would be interested if i had a motor turning out enough massive hp/torque to need one of these,anyway bump and glws
#9
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was checking the 2 cases I have just a few minutes ago for cracks, which there are none, but I was incorrect about the casting number. The one I gave was from the Trak-Lock unit. The casting number on both cases is D0OW-B. This is the best case you can get for a 9 inch.
Last edited by sschoeffler; 01-06-2010 at 04:49 AM.
#17
TECH Fanatic
iTrader: (2)
Join Date: Jan 2007
Location: Ashland & Lexington, KY
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Um, maybe with a differential (posi) and gear already setup... I ran a virgin (original gear and posi unit, never taken apart) one from an old (I think 69) mustang in my rear (while I got my Strange case straightened out), and the guy said he paid 400 or 450 for it..