LT1 Zex Dry Nitrous & Pacesetter Longtubes
01-07-2010, 07:22 PM
#1
On The Tree
Thread Starter
Join Date: Jul 2008
Location: Gaithersburg, MD
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
LT1 Zex Dry Nitrous & Pacesetter Longtubes Used LT1 Zex Dry Kit: $275 + shipping
Purchased from a LS1tech member last year, never installed.
Link to Zex website with information - http://www.compperformancegroupstore...uct_Code=82018
Used set of 96-97 Pacesetter Longtube Headers with emissions $250 + shipping
Purchased from a LS1tech member used. Has some rust near collectors, and dent in the passenger side header as you can see in the picture - did not cause any kind of leaks or performance/sound loss.
(These will fit any LT1, as per Pacesetter rep the only difference between them are the emission fittings. I purchased air check valves for a 96 from www.RockAuto.com and everything worked well.)
Used Pacesetter Off Road Y-Pipe $40 + shipping
Pipe was cut near the end, but fit my SLP cat back with no issue's but depends, you may need to weld or add extra to it but otherwise pipe is in OK condition.
I am open to trades or offers. Only selling because times are tough and this stuff is sitting in my basement. Can reach me here via PM or email me at rphirsch@gmail.com
Purchased from a LS1tech member last year, never installed.
Link to Zex website with information - http://www.compperformancegroupstore...uct_Code=82018
Used set of 96-97 Pacesetter Longtube Headers with emissions $250 + shipping
Purchased from a LS1tech member used. Has some rust near collectors, and dent in the passenger side header as you can see in the picture - did not cause any kind of leaks or performance/sound loss.
(These will fit any LT1, as per Pacesetter rep the only difference between them are the emission fittings. I purchased air check valves for a 96 from www.RockAuto.com and everything worked well.)
Used Pacesetter Off Road Y-Pipe $40 + shipping
Pipe was cut near the end, but fit my SLP cat back with no issue's but depends, you may need to weld or add extra to it but otherwise pipe is in OK condition.
I am open to trades or offers. Only selling because times are tough and this stuff is sitting in my basement. Can reach me here via PM or email me at rphirsch@gmail.com
01-08-2010, 06:23 PM
#3
10 Second Club
iTrader: (8)
Join Date: Jan 2009
Location: Central, PA
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
How much is there to slip a pipe on the end of the Y-pipe......... me a Pm, if you can make me a good deal shipped to Watsontown PA 17777 I might be willing to see if I can use it.........thanks
01-09-2010, 11:57 AM
#6
On The Tree
Thread Starter
Join Date: Jul 2008
Location: Gaithersburg, MD
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
You're about 3 hours from me, I am willing to meet you if that would help on shipping.
Trending Topics
01-09-2010, 02:16 PM
#8
10 Second Club
iTrader: (8)
Join Date: Jan 2009
Location: Central, PA
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
I don't think it would be very economical to drive that far for a $40 part, If you could get a shipping quote and we'll go from there.......I could possibly meet you if shipping is too much, Thanks
01-11-2010, 12:10 PM
#9
On The Tree
Thread Starter
Join Date: Jul 2008
Location: Gaithersburg, MD
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Bump. Everything still available and still looking for trade/offers.
I will hopefully get you a quote today after work, the pipe is just wide so I am not sure of the dimensions of the box I would need.
I will hopefully get you a quote today after work, the pipe is just wide so I am not sure of the dimensions of the box I would need.
