BoostedSS

Category: Engine - Complete Motors
Price: $5500
Part Fits: 2010+ Camaro, Corvette, 04-06 Pontiac GTO
Location (State): IL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9

It's an LSX bowtie block 4.125 bore 4.00 stroke. Internals include Ross custom pistons. The piston crown is thicker(ringland moved down), it's a -7 dish piston, i believe, and coated pins. The pins are basically the baddest ones they make for an ls piston. My engine builder has the build/spec sheet on the pistons, which comes with the shortblock. Along with a detailed buildsheet on the machining and balancing. It's got a hellfire ringset. It's got Eagle hbeam(6.125) conecting rods with ARP 2000 rod bolts. Eagle Crank with 58 tooth reluctor wheel. Clevite bearings, with custom cam bearings, with Arp main studs. This motor can take a pretty serious shot of n20. The compression ratio with a 66 cc cumbustion chamber will be around 11.5:1. There was also extra machine work to the cam tunnel. And the cam bearings that came with the block were cheap and poorly made, so that was the reasoning for the custom cam bearings.
I also have a pair of ported l92 heads(assembled), carb style intake, edelbrok fuel rails, racetronix 46lb/hr fuel injectors, melling oil pump. The top end has around 2 hours running time on a different engine, and i can sell it as a long block if interested. Everything else is brand new.

SmurfLSX

iTrader: (9)

Who built the motor?

camnz06

Would you be interested in just selling the heads, intake and rails?

BoostedSS

A local engine builder. He does very good work. He does local stuff around the south chicagoland area. He doesn't advertise here or anything if that's what you're asking?
He has been building engines for over 25 years. And does a professional job, and documents every detail of his work which comes with the motor.

BoostedSS

I sure can. The heads have a street port, valve job, ferreha(can't spell it right) valves, 2.20 1.60 valves, manley spring kit with titanium retainers. The spring kit is brand new. I can do $1300 with the intake fuel rails.

70ls1chevelle

iTrader: (119)

Is $5500 for longblock or shortblock ??

BoostedSS

Short block.

BoostedSS

Sale pending on the top end.

BoostedSS

Bump.

High Torque Tuning

iTrader: (1)

what's shortblock price?

High Torque Tuning

iTrader: (1)

u got< pic> of the motor

SSPerformance

iTrader: (76)

4000 for the short block I will cover shipping

High Torque Tuning

iTrader: (1)

pic of the motor?

XxXTransAmXxX

iTrader: (12)

Pics would probably help greatly

BoostedSS

I'll have pics up by this weekend. The shortblock is at the engine builders shop. So, that's why i don't have pics up yet.

BoostedSS

I'm asking $5500 for the shortblock!