GMMillwright

iTrader: (4)

Category: Engine - Complete Motors
Price: $1500
Location (State): IN
Item Condition: Used
Engine: LS1/LS6

Forged crankshaft, rods and pistons. All parts cleaned and inspected by C & P Machine in Fort Wayne, IN. Crankshaft was polished as well. Originally assembled by Motosport Technologies of Houston (MTI). Price is negotiable.

slow95z

iTrader: (33)

what size bore stock or 3.905?

XtremeDime

iTrader: (16)

Details on pistons? What cc are the reliefs?

'04 goat man

I'd be interested in the crank and rods if you decide to split things up.

THX

Neal

wantsum410

iTrader: (5)

I am very interested if it is for the stock block ls1 346 or 383!!!need details please.

cyclerage

iTrader: (59)

yes, more details..............

High Torque Tuning

iTrader: (1)

pm send.

GMMillwright

iTrader: (4)

Stock bore size. Originally purchased 7/00 from Motorsport Technologies (Houston). I'm owner #3. Rods are 6.125 and the crank is 4.0. Put it all in an LS1 block, and you get 382 cubic inches. Total mileage is around 25k. Car was sprayed by owner #2 and myself. C & P Machine here in Fort Wayne, Indiana just cleaned and inspected everything and found all parts to be perfect. Only machinig they did was to polish the crank. No grinding was necessary. Replacement cost on the crank is $1775 (Jegs). Speed, Inc. has the rods for $690, IIRC.

GMMillwright

iTrader: (4)

I don't know the cc of the reliefs. CR was 11.25:1 with 66cc AFR 225s. Only number stamped on underside of pistons is: 500__99. Only stamping on topside of pistons is: LS11

http://i73.photobucket.com/albums/i2...blyandCam5.jpg

http://i73.photobucket.com/albums/i2...blyandCam3.jpg

http://i73.photobucket.com/albums/i2...lyandCam10.jpg

http://i73.photobucket.com/albums/i2...blyandCam2.jpg

RENE'S RAGE

iTrader: (96)

Super deal fellows. The crank alone is worth $1500. I've got this same set up. Had it for 10 years, tore the motor down this winter and everything looked brand new. Going to put mine in a LS3 block (416). This kit is BULLETPROOF. This is all Pro Mod stuff.

Josh@KY-Turbo

iTrader: (120)

PM sent.

GMMillwright

iTrader: (4)

Thanks for the bump. I should have priced it higher! I figure it'll cost $80-$100 to ship it, so pick up would be appreciated.

Nabdrill

iTrader: (19)

Will that crank work with MSD 6LS ignition??

GMMillwright

iTrader: (4)

I assume it would, but can't say for sure. It's a 24X reluctor wheel.

01 BERGER CAMARO SS

iTrader: (77)

is that the price with shipping? also, its the assembly balanced?

GMMillwright

iTrader: (4)

Yes, balanced. No, shipping not included.

wantsum410

iTrader: (5)

Pm sent need price shipped to 72401.thanks duke ....note...the addiction is stronger than the financial reasoning which has no chance against the drop of the clutch at 7grand!!!yes i know i need help but i do not want it!:d

GMMillwright

iTrader: (4)

Sold, payment pending.

wantsum410

iTrader: (5)

I am ready to pay,your verizon pmt adress will not accept my paypal thru my card!Thanks Duke

GMMillwright

iTrader: (4)

PM sent.