224/221 .581/.566 110lsa Custom Comp Cam FS/FT for z06 cam
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Category: Engine - Intake/Fuel
Price: $225
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): IA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
Cam card from Comp Cams-
Serial # Z 9212 Spec Card# 041647
Part # 54-000-11 CAMSHAFT, LS1 CHEVY LS1/GEN III '97-UP
Core C54-11H CAMSHAFT BLANK, LS1 1997 UP 5.7 CORVETTE
Grind # LS1 3722R /3671R HR113+2
DURATION @ .050 INTAKE 224 ROCKER ARM RATIO
VALVE ADJ INTAKE .000 DURATION @ .050 EXHAUST 221 INTAKE 1.70
VALVE ADJ EXHAUST .000 LOBE LIFT INTAKE .3420 EXHAUST 1.70
VALVE LIFT INTAKE .581 LOBE LIFT EXHAUST .3330
VALVE LIFT EXHAUST .566 LOBE SEPARATION 113.0
DURATION .006 INTAKE C/L 111.0
TAPPET LIFT INTAKE 273 CAM ADVANCE 2
TAPPET LIFT EXHAUST 273 HYDRAULIC Y
VALVE TIMING .050 OVERHEAD CAM N
VALVE OPEN INTAKE 1 JOURNAL DIAMETER STD 2.165
VALVE OPEN EXHAUST 45 RECOMMENDED VALVE SPRINGS
VALVE CLOSED INTAKE 43 DEPARTMENT P
VALVE CLOSED EXHAUST 4- SPC INSTR FOR CUSTOMER
The cam is still in the motor and wont be taken out until i have someone ready to buy.
Price-
$225 shipped to the continental 48 US states
or
Trade for a slightly used or new z06 cam (i can get a new one on ebay for $200)
PLEASE PM ME WITH INTEREST! or email me at Jmnewcomer@ymail.com
Last edited by 2XR95Z28; 03-05-2010 at 03:44 PM.
#2
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Forgot to mention one of the timing chain gear screw holes is stripped on the cam, going to call a local machine shop tomorrow to get a price on fixing, will adjust the price accordingly once i get more information.
Sorry about that...
Sorry about that...