***SOLD***ATI Procharger D1SC kit with SDCE 8-rib tensioner and extras
#1
***SOLD***ATI Procharger D1SC kit with SDCE 8-rib tensioner and extras
Category: Engine - Power Adders
Price: $3900
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): AK
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Non-LS Part
ATI Procharger D1SC kit with twin intercoolers and SDCE spring tensioner and 8 rib setup. This kit is complete with the exception of the relocation brackets for the horn, air, and cruise control box (which I never had to begin with, and didn't need. The horn and cruise are easily relocated with no special brackets or fabrication). I have every clamp, nut, and bolt you need to install this kit in its entirety. Here's the breakdown:
-ATI Procharger D1SC with polished plenum
-Twin intercoolers
-SDCE spring tensioner with 8-rib setup; includes 7.25" crank pulley and 4" blower pulley, as well as a blower brace. Will include instructions for install.
-Blower hat with K&N filter
-Bypass valve
-Procharger fan shroud with 16" Spal fan
-All piping with all clamps
-2 8-rib belts for use with 4" pulley
-Hardware assembly that tees off the brake booster vacuum line, and feeds the bypass valve as well as the boost gauge
-Autometer boost gauge
-5 bottles of Procharger oil
-Catch can
The only thing you will need to bolt this on your car and go is your choice of injectors and a fuel pump. As previously stated, I did not need the relocation brackets for the horn or the cruise control...just moved them up and out of the way with no issues. If you need them, the relocation brackets are readily available from some of the board sponsors. I would also strongly suggest buying a new crank bolt, which is about $6. I have one included with the kit, but it is recommended that you replace it anytime you remove it.
This setup made 10psi at about 6000rpm on a completely stock motor with a full length exhaust. Not sure of the mileage on the headunit, but the entire kit worked flawlessly. My ringlands let go yesterday and I need to sell the kit to rebuild my engine...otherwise I wouldn't dream of selling it.
$3900 shipped. Paypal is available, but we'll need to split the 3% surcharge.
Last edited by -Q-; 06-29-2010 at 07:51 PM. Reason: Sold
#6
TECH Resident
iTrader: (3)
Join Date: Jul 2009
Location: Fenton, MI
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
So was this rattle your motor then?
https://ls1tech.com/forums/forced-in...er-rattle.html
Or has rattle been fixed?
https://ls1tech.com/forums/forced-in...er-rattle.html
Or has rattle been fixed?
#7
So was this rattle your motor then?
https://ls1tech.com/forums/forced-in...er-rattle.html
Or has rattle been fixed?
https://ls1tech.com/forums/forced-in...er-rattle.html
Or has rattle been fixed?
Hope that answers your question.
Trending Topics
#9
TECH Resident
iTrader: (3)
Join Date: Jul 2009
Location: Fenton, MI
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, Yes that answers question. I understand they all rattle a bit and I know that was your thread. I just wanted to make sure there wasn't something else wrong with the unit. Thanks. Sorry to hear about your hurt motor.