Ratical

iTrader: (82)

Category: Accessories
Price: $2500
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): NY
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

Never assembled!!!! 404ci balanced stroker rotating assembly.

*NEW* Precision 4" stroke 4340 forged steel crankshaft. 24 tooth reluctor wheel.


Lunati Pro Mod 6.125" connecting rods. .927 pin. Bushed.


*NEW* Diamond -15cc dish 4.010 bore pistons


*NEW* Akerley and Childs Ductile iron file fit rings


*NEW* Clevite 77 race rod bearings


Internally balanced assembly

This is just the rotating assembly. The block is NOT included.

Everything is brand new except the rods that I bought from a friend. He had about 10 passes on them and melted a piston. All machine work was done at Larry's Speed and Marine in Tucson Arizona. The number one LS engine builder in Tucson! Only part I lost in the move from Arizona is the Clevite 77 main race bearings but that will not affect the balance.

SOLD!!!
__________________________________________________ _______________

I also have the fully machined iron 6.0 block for this assembly, but I do not want to ship it for obvious reasons. It is a 2002 6.0 that had less than 3000 miles on it when the vehicle was wrecked. I had the shop bore the cylinders out to fit the Diamond pistons, hone the block with deck plates to the specs provided by Akerly and Childs for the rings, installed new ARP studs and opened up the main saddles for proper clearance for the main bearings, (Factory was too tight), installed new cam bearings and checked the deck surface for straightness.

I have well over $1k in this block. I will sell the block for SOLD if you pick it up. I will drive within 100 miles to meet you for pickup. If you buy the whole assembly too I will sell everything for SOLD

Ratical

iTrader: (82)

Will ship everything but block. If you want the whole assembly, you will have to pick it up.

CanuckSS

iTrader: (13)

If you are willing to separate, I would like some more information on the pistons.
A part number would be good and some pics also. davehounsell@hotmail.com for pics if it helps. Thanks

vipersquiggybmu2

iTrader: (13)

I am in Cliffton Park NY. I would like to talk to you about your short block. please contact me some time today or any time after 3 on week days. my contact info is 2705056472

jt76

iTrader: (10)

Is the block alum or iron?

Ratical

iTrader: (82)

Iron.

Ratical

iTrader: (82)

I really don't want to break the assembly up because I already paid to have it balanced. If it doesn't sell I will eventually assemble it and use it.

Ratical

iTrader: (82)

Tried to call but went to a message that said no voicemail. I PM'd you my number.

Mark1si

iTrader: (4)

I might take the crank for the right $$