LT1 part out Pro Mags, Edge Racing Stall, Ported heads!!!
08-12-2011, 07:27 PM
#1
LT1 part out Pro Mags, Edge Racing Stall, Ported heads!!! Category: Accessories
Price: $1
Location (State): AL
Item Condition: Brand New
LS Engine?: Fits LS Engine
LT1 Ported heads Have pushed the car it was in to 6.99 at 100 on a 150 shot
Would sell with Guide plates studs everything patriot gold springs- 750$ would seperate apon request
Pro mags-225
Edge 3800 stall- 400 plus shipping
Holly 58MM TB coolant bypass- 200 bucks
42 Pound Injectors- 200 bucks
Stock rebuilt bottom end less then 1k miles new lifters 4 Bolt main-500 bucks
LS1 set up for LT1 cars- 75 bucks with Radiator support and lid and filter
1996 Trans AM roller with 3.73s -1000
2 stock size stall converters 1 might be restalled higher not 100% sure- 50 bucks a piece
Y Pipe with Magnaflow set up bolt right up to ebay headers- 150 bucks
Tranny cooler with braided lines all ready to go- 150 bucks
I want to keep the car it self complete so no need to ask for parts off the car itself but everything in the engine bay will be fair game.
I would Sell the LT1 with 4L60E with Egde stall and all the bolt ons for 3200 would be a great set up. PM me with what you guys might want.
08-13-2011, 12:16 AM
#4
No its 100% stock rebuild on the bottom end me and the previous owner had no problems spinning it where it wanted to be with the CC306 and always had awesome oil pressure.
http://www.youtube.com/watch?v=1BDF9HVpcgY
quick video there showing the oil pressure motor is a well built piece for being a stock rebuild
http://www.youtube.com/watch?v=1BDF9HVpcgY
quick video there showing the oil pressure motor is a well built piece for being a stock rebuild
08-13-2011, 12:16 AM
#5
No its 100% stock rebuild on the bottom end me and the previous owner had no problems spinning it where it wanted to be with the CC306 and always had awesome oil pressure.
http://www.youtube.com/watch?v=1BDF9HVpcgY
quick video there showing the oil pressure motor is a well built piece for being a stock rebuild
http://www.youtube.com/watch?v=1BDF9HVpcgY
quick video there showing the oil pressure motor is a well built piece for being a stock rebuild
08-13-2011, 12:31 AM
#6
11 Second Club
Join Date: Feb 2011
Location: Willard, OH
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
How would you compare.the edge 3800 vs a yank ss4000? I had my mind.made up about the yank but.if.the edge stall is just as.good.is be interested.. I no some stalls you have to crazy hp to push like the py series ..
08-13-2011, 12:35 AM
#7
I don't know how to compare it personally
Dwayne who has i think an 11 second Impala with a AI package runs an Edge Stall 96capricer I or something like that on here. They are in the upper brand of stalls. Mysterbird also runs the Edge stall and runs mid 11's. Those results seem to answer the questions to me.
Dwayne who has i think an 11 second Impala with a AI package runs an Edge Stall 96capricer I or something like that on here. They are in the upper brand of stalls. Mysterbird also runs the Edge stall and runs mid 11's. Those results seem to answer the questions to me.
