Pistons, Proflo edelbrock plumbed, nitrous stuff.. fjo controller..etc
08-15-2011, 07:42 PM
#1
TECH Resident
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: woodstock GA
Posts: 897
Likes: 0
Received 0 Likes
on
0 Posts
Pistons, Proflo edelbrock plumbed, nitrous stuff.. fjo controller..etc Category: Accessories
Price: $1000
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): GA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Edelbrock Pro Flo Intake for GM Cathedral lsx heads, Has a four solenoid direct port plumbed on it, the intake is the black version and is 520$... The kit is a nitrous outled four-noid direct port which is around 700$ plus Milling/drilling/plumbing/tubing intake is plumbed and ready to bolt on-1250$ obo
I also have a 15lb nitrous outlet bottle with glow-in-the-dark pressure gauge in the neck... its been used so yes it has a few scratches, its black 264.99 new- 225$ obo
Also have an FJO mini nitrous controller for tps/window/progression and will run two stages, has trans-brake delay mode and runs rpm based ramps and time based ramps- 220$ obo, good luck finding one. http://fjoracing.com/products/2stageminicontroller/
I have a -6 feed line I believe to be about 10 feet long w black fittings 40$
Or a 20 foot -6 feed with black fittings for 65$
Also i have a dedicated fuel system for nitrous, it's a 1 gallon cell with a submerged factory z06 efi fuel pump, aeromotive return style regulator with black fittings and a white faced autometer gauge, ready to run 400$ obo
Also have a set of 2618 Manley/SDPC 4.005 bore +10cc dome pistons for 6.125 rods, full floating pin, used about 20 passes 400$ obo
