5.3 & 243 heads; Mahle pistons; Yank SS4000
10-02-2011, 10:11 AM
#1
Launching!
Thread Starter
iTrader: (32)
Join Date: Nov 2001
Location: Greensboro,NC
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
5.3 & 243 heads; Mahle pistons; Yank SS4000 Category: Drivetrain
Price: $500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): NC
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
I have added a set of Harland Sharpe upgraded stock rockers which are $185 paypal shipped. Also added pics of the Yank and 243 heads. Gotta guy thats gonna let me know one way or another on the heads then I will update again.
Hello boys and girls. I recently sold my car and purchased a 2005 Vette so I will not be needing any of my left over/never got installed LS1 parts.
1) I have a set of ported 5.3 heads. They have PRC .660 lift dual springs, ferrea 2.02 intake and 1.57 exh valves, titanium retainers, multi angle valve job.. milled .030/ now have a 58cc combustion chamber..raise the compression on your stock bottom end to around 11.5 To 1. This is the original thread on tech where my buddy bought them: https://ls1tech.com/forums/lsx-parts...ea-valves.html price:$425 shipped paypal SOLD
2) I have a set of Mahle pistons, rings, pins Brand New In Box. They are 3.905 bore (I believe it makes your motor 347 ci) and have 4cc valve reliefs (to accomodate the milled heads). They are part # ls1-340905f04 and sell online anywhere from $550-$700 for example: http://www.summitracing.com/parts/MLE-LS1340905F04/ price:$450 paypal shipped SOLD
3) I have a set of 243 heads off of a 06 GTO purchased from this thread here: https://ls1tech.com/forums/parts-cla...-ton-more.html they are not assembled but come with the valves and springs. price:$375 paypal shipped
4) I have a fresh/ready to go Yank SS 4000 TC that was purchased from this thread here: https://ls1tech.com/forums/lsx-parts...nk-ss4000.html It is in exactly the same condition. I got it, put it on a shelf in Pops garage and it has sat there ever since. price:$550 paypal shippedSOLD
5) I have a set of O2 sims purchased here: https://ls1tech.com/forums/lsx-parts...pped-pair.html Not even sure why I bought these
I had them tuned out when I added the Fast 92/92 combo anyways. Price:$25 paypal shipped SOLDI only have a few pics at the moment. Will take some of the 243s later and get those up. Sims look like sims and the Yank looks like a Yank
I just don't have access to pics of those at this second. Jman
Yank pics
243s and bags of springs/hardware
Last edited by j-man; 10-10-2011 at 06:02 PM. Reason: mark sold items
10-02-2011, 01:41 PM
#6
Launching!
Thread Starter
iTrader: (32)
Join Date: Nov 2001
Location: Greensboro,NC
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Thanks low 
I thought so too. I have had all this stuff for a long long time and since I sold the car they need to go. Didn't wanna spend a bunch of time haggling prices.
Pistons have been sold
O2 sims have been sold
I thought so too. I have had all this stuff for a long long time and since I sold the car they need to go. Didn't wanna spend a bunch of time haggling prices. Pistons have been sold
O2 sims have been sold
Trending Topics
Glad you are selling items though, free bump... 
10-07-2011, 05:02 PM
#12
Launching!
Thread Starter
iTrader: (32)
Join Date: Nov 2001
Location: Greensboro,NC
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
While pulling the 243s outta storage I discovered that I had forgotten about having a set of Harland Sharpe upgraded stock rockers laying around.
I will sell these for $185 shipped Paypal
I will sell these for $185 shipped Paypal
10-09-2011, 11:03 PM
#18
Launching!
Thread Starter
iTrader: (32)
Join Date: Nov 2001
Location: Greensboro,NC
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately, I do not. It did come with the Yank when I got it from the original thread but I can not put my hands on it right now. I looked for it yesterday when I picked it up from Pops garage but couldn't find it. If it turns up I will scan and post. Not sure but maybe a way to find out thru Yank??? I assure you it is legit. Check my feedback, been doing this ish for a long time on here. If ya don't feel comfortable about it, no worries. I'll put it on a shelf Hell I have owned 4 LS1 Fbodys, probably end up with another one anyways haha Anything else I can do just let me know
Jman
Hell I have owned 4 LS1 Fbodys, probably end up with another one anyways haha Anything else I can do just let me knowJman
10-10-2011, 05:22 AM
#19
Not that I don't trust you just cautious that it was sent back to get rework because it was to loose and has not Been ran since. If I knew that I could send it back if it was still loose then I'd jump on this.
10-10-2011, 05:42 AM
#20
Launching!
Thread Starter
iTrader: (32)
Join Date: Nov 2001
Location: Greensboro,NC
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Like I said, no worries. As the thread states it was a used pe4200 he sent it back and they completely rebuilt it and is now a brand new SS4000 unused. Sloppy is not refering to a defect, but too much converter for his set-up. It being sloppy would depend on your set-up.