Eagle 6.125 H-Beam Rods Mahle 383ci 6cc Forged Pistons Balanced

Reply Subscribe

Thread Tools

Search this Thread

10-23-2011, 08:06 PM

300zxls1

11 Second Club

Thread Starter

iTrader: (13)

Join Date: Dec 2005

Location: Cape Cod

Posts: 658

Likes: 0

Received 0 Likes on 0 Posts

Eagle 6.125 H-Beam Rods Mahle 383ci 6cc Forged Pistons Balanced

Category: Engine - Complete Motors
Price: $875
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): MA
Item Condition: Used
Engine: LS1/LS6
LS Engine?: Fits LS Engine

Up for sale is a set of 8 Eagle Forged H-Beam 6.125" rods with ARP 8740 bolts and Forged 4032 Mahle 3.905 6cc valve relief 4" stroke pistons(no rings included). These pistons are setup to run with a 4" stroke crank and a 3.905" bore to make a 383ci LS. The pistons and rods are in good used condition and are balanced. They were used for 5k miles. There are some small scratches around the wrist pins on the piston from the pin retainers being installed. The scratches will not effect the pistons performance in anyway. There is no other damage to the pistons or rods.

I will be using the 4" stroke crank from this rotating assembly to build a 408. So I am selling these pistons and rods to pickup a higher compression piston setup in a 4" bore for a nitrous motor. Trades forged pistons 4" bore, 76-80mm turbo, let me know what you got.

Eagle H-Beam Rods ARP 8740 Bolts 6.125" length .927" pin

Mahle Forged LS1 Pistons for 4.00" stroke crank (no rings included)
Bore (in)
3.905
Piston Style
Dish, with two valve reliefs
Piston Material
Forged aluminum 4032
Compression Distance (in)
1.105 in.
Piston Head Volume (cc)
+6.00cc
Wrist Pin Style
floating
Pin Diameter (in)
0.927 in.
Top Ring Thickness
1.5mm
Second Ring Thickness
1.5mm
Oil Ring Thickness
3.0mm