DAVESS02

iTrader: (30)

Category: Drivetrain
Price: $2500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

Moser 9" with Alum. Moser bolt through case, 35 spline axles, detroit locker, 4ch ABS, 3:70 gears with backing plates. Also has relocation brackets and standard type swaybar mounts welded on. Ready to bolt in. Has about 15K of daily driven use behind a mild cam'd 403. gears make a little noise, nothing bad.
$2500


T-56 from 02 F-body. Six Speeds faceplate conversion 1st-4th, synchro'd 5,6,Reverse, assembled by me. Had all bearings replaced when built. 30 spline Viper output conversion. No shifter. I've got another thread with detailed pics here:
https://ls1tech.com/forums/manual-tr...l#post15981074
$2100 I go through it, bead blast the case, replace anything as needed
I've begun the rebuild and I'm replacing the 5/6 cluster as the splines are worn and 5/6th slider assembly since they got beat up. The face plates are in good shape and are gonna be de-bur'd before re-assebly. Will be another 2 weeks before its done



PST 3 1/2" driveshaft. Measures 41.5" between center of u-joints. Purchased new from Bob @ Exotic after I got the 9" installed Spicer yoke $415

UMI chromoly torque arm. tunnel brace style with DS loop. Modified to work with my 3" true duals. $415


04 Z06 wheels. Painted a cleaner silver then factory. Have both camaro and corvette center caps plus a pint+ of extra paint. Have some small scratches around the center hub from the tire mounter. Fronts have 17" Kumo's with lots of tread left. Rears have bald/worthless 305 35 18 ET Street II's No curb rash whatsoever. SOLD!






Eclipse CD7200mkII copper plated chassis, time alignment and 7 band PEQ. Top of the line eclipse single din deck. These units are RCA output only, NOT INTERNALLY AMPLIFIED. You MUST use with an amp. has a bit of wear on the lettering on the detachable face. Comes with wire harness and case for face storage. $325




Comp Cams Magnum 1.75 steel roller rockers, studs, and guide plates. 15K on these. For cathedral port(non offset) heads.
$350

All items are available for local pickup. Shipping at buyers expense.

1998MysticZ28

iTrader: (10)

shipped price to 33467

Zmg00camaross

iTrader: (11)

So the trans otherwise is in good shape? I will see what tax time has to offer and maybe just maybe we can work out a deal.

dr_whigham

iTrader: (49)

God I want the wheels.

Any use for a full set of body armor or an Ibanez guitar autographed by Mudvayne (All 4 members)?

SF 1HOTLS1

iTrader: (24)

if you decide to lower the price on that moser i'll take it for the right numbers.

DAVESS02

iTrader: (30)

As cool as that sounds, I need cash for more wheels.

00Wildcat

I'm interested i the third member if you will seperate.

whitemike03911

If you sell the 3rd member I'm interested in the housing.

DAVESS02

iTrader: (30)

Thanks, but not looking to part out.

hotjohnnyls1

lowest price shipped on the z06s to 94579?

Bruser's LS1

iTrader: (20)

how much for the trans shipped to 75043? Are you sure that s the only internal issue?

DAVESS02

iTrader: (30)

PM sent. Gonna go ahead and freshen up the trans before sale.

superman2002

Send pics of trans and rearend to 6203049031 plz

superman2002

would you take 2000 for the rearend or 1200 for the tranny

DAVESS02

iTrader: (30)

Not a chance.

94Ztwentylate

iTrader: (1)

still got the wheels?pm a shipping price to texas 76180.il pay the shipping if its not completely outragous

gmoney1082

iTrader: (14)

Pm sent

DAVESS02

iTrader: (30)

Wheels sold to 94Z, THANKS!

Raptor_WS6

iTrader: (23)

how much for the rear shipped to 91345 business address

DAVESS02

iTrader: (30)

To The Top!