Forged Stroked 427 Cubic Inch LS3/LS1 FREE SHIPPING!!
#1
Forged Stroked 427 Cubic Inch LS3/LS1 FREE SHIPPING!!
Category: Engine - Complete Motors
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): CO
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Very low mileage 6.2 Liter Aluminum Block (4.068" Bore) with new cam bearings installed and all machine work completed.
Stroker Forged Scat Crank (4.10" stroke) Uses LS1 Reluctor.
Manley Pistons, Pins, and Rings. From Scoggin Dickey.
All new Crank and Rod bearings.
$4000 for the Bottom end parts Delivered to the Continental USA for above Parts.
Block is not available separately at this time.
--------------------------------------------------------------------------
The Heads are 853 GM castings that were Stage 3 CnCd by T.E.A., (Total Engine Airflow) then I port matched them to the Lingenfelter Aluminum intake and while I was at it I polished the heads inside and out. They flow 298 cfm at .5000 and 329 at .6000, Over sized 2.08" intake valves and 1.60" exhaust valves, milled to have 10.7:1 compression. New Isky 8005a Dual Valve Springs with Titanium Retainers. Gaskets and new "one time use" head bolts.
Lingenfelter Ported and Polished Aluminum Intake which even comes with Fuel Injectors and gaskets. Beautiful inside and out.
Ported and Polished Throttle Body.
The cam is from Texas Speed and Perormance, called the Patriot , Grind # LS: 226R/226R. Specs are Duration at .050" 226 intake 226 exhaust, .585"/.585", 112 Lobe seperation. I have the spec sheet to include with the purchase.
$1500 for the Top End Parts listed above delivered to the Continental USA.
--------------------------------------------------------------------------
Polished Stainless headers. $150
Polished Water Pump that is used.$110
Underdrive crank pulley/Balancer (used) with new Bolt. $95
Polished Power Steering Pump Pulley. $45
I'll even throw in the Engine Stand that's like new if the entire package is purchased for $5200
When this engine is all together it will easily be worth over $10,000.00
There is no better deal on the planet!
It's a little more shipable since it's not assembled yet.
Free Shipping to the Continental USA!
I will send it to a Shipping Terminal near you.
Free Handling!
It was just loosely bolted together for the photos.
You can reach Gerald at 719-250-5244 during daylight hours please.
Last edited by 69ls1ss; 03-25-2012 at 08:53 AM. Reason: responses to origional post
Trending Topics
#15
12 Second Club
iTrader: (10)
Join Date: Jan 2007
Location: Charleston, SC
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
853 heads...ported...for a 427 stroker motor...and a "226R" cam, with specs that are small for a 346. Can Texas Speed and TEA vouch for any of this?
Scam. I will bet on that. Paypal ready
Scam. I will bet on that. Paypal ready
#18
On The Tree
iTrader: (8)
Join Date: Oct 2010
Location: Houston,Tx
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Can we get some pictures with your screen name so where with you holding it for all i know you cojldve ddownloaded these from google im interested in short block but im not chancing that much money