LS1 Parts, Intake, ported/polished/powdered TB, with new sensors, wire Harness, etc
#1
LS1 Parts, Intake, ported/polished/powdered TB, with new sensors, wire Harness, etc
Category: Engine - Intake/Fuel
Price: $300
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): CA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
SOLD
-LS1 wire harness, has been modified to be ran as a stand alone unit (trans harness deleted out)
SOLD
-Current Perfomance Fuse/relay distribution center, brand new never used
http://www.currentperformance.com/Ac...ies/SA-1k.html SOLD
-Ported and Polished Throttle Body, custom work done by the sought after "408transam" (https://ls1tech.com/forums/parts-cla...body-sale.html), has not been used or bolted on the intake, since bought it from them.
SOLD
-Brand new sensors for the TB. IAC and TPS sensors (with screws)
SOLD
-3 wire MAF in good condition
SOLD
-LS1 PCM, has been flashed/reprogrammed by LT1Swap.com and is ready to run
SOLD
-msd plug wire set product #32813 BRAND NEW (my coils are relocated wont work for me)
Donated to a project, paid it forward!
Lokar LS1 throttle cable, TC-1000LS1 (brand new)
SOLD
Pics and video up, if you need more info/video/pic, just ask)
I have a great trader rating and intend to continue to be a good person, ask those who have purchased from me, i expect the same and will take either cash in person, or paypal. Prices do NOT include the paypal fee (you can send money as a gift for no fee)
feel free to make your best offer, im not motivated by money! just need to get some of mine back, cause my build changed directions.
have more stuff like NEW WALBRO Fuel pump, corvette filter regulator, etc, if interested pm me and Ill dig through all my goodies... stuff like that i can always keep for the next build though... pics and video further down in the thread...
SOLD
PLEASE REFER TO POST #31 ALSO
Last edited by LSCustoms; 04-19-2012 at 09:43 PM.
Trending Topics
#9
I also have a brand new walboro? fuel pump and wix fuel regulator and an inline filter, with an adapters... i think i wont be able to use that setup with the carb, gonna research that... i gotta dig through my pile and find it all for part numbers and pics/video...
one of the fittings
one of the fittings
Last edited by LSCustoms; 04-16-2012 at 02:09 AM.
#13
updated with prices and info...
if you buy multiple items you can expect a better deal.
also, on a side note, please understand that I am motivated to sell, I will not generally assume you agree to the price Im asking or that you want it after I tell you I accept your answer until payment is made. please do not ask for my paypal address unless you are ready to pay at the time you ask for it! this creates problems, where someone else is ready to pay and im waiting for days, just to be told, you no longer want the part. in a case where I give you my paypal info and you say you are going to pay, please estimate a time you will pay me. If agreed on the time, I will wait until that time has passed before I offer it to someone else. If someone else buys the product and you decide to pay after your time has expired. I will refund the money! no hard feelings, just going off experience...
if you buy multiple items you can expect a better deal.
also, on a side note, please understand that I am motivated to sell, I will not generally assume you agree to the price Im asking or that you want it after I tell you I accept your answer until payment is made. please do not ask for my paypal address unless you are ready to pay at the time you ask for it! this creates problems, where someone else is ready to pay and im waiting for days, just to be told, you no longer want the part. in a case where I give you my paypal info and you say you are going to pay, please estimate a time you will pay me. If agreed on the time, I will wait until that time has passed before I offer it to someone else. If someone else buys the product and you decide to pay after your time has expired. I will refund the money! no hard feelings, just going off experience...
#14
if for some reason you read this thread and you dont think the price if fair... please pm me a best offer (I will either say no, or counter with my best request)... if i notice a trend where Im getting a consistent lower offer, than I will consider lowering the prices. However the prices I have listed are well under what i paid for this stuff. havent even opened most of it and have not fired my motor up yet.
i am really looking to get over 800hp to the ground on my transplant, well thats the goal anyway, so I cannot use the stuff I am selling, this is the only reason for the sale
i am really looking to get over 800hp to the ground on my transplant, well thats the goal anyway, so I cannot use the stuff I am selling, this is the only reason for the sale
#19
pms replied to or are being replied to now...
the following has sold (will also update the first post):
-Intake/fuel rail/injectors
-PCM/PCM Holder, LS1 wire harness, MAF, OBD2 plug
everything else still for sale and am going to pull out all my fittings, fuel set up, etc. and get a better inventory since there are some interested in that stuff... I need to make sure I cant use it with my new direction.... i dont think i can use the fuel pump/regulator, or those fittings that i purchased to make that work... even have ss braided lines... lots of stuff
the following has sold (will also update the first post):
-Intake/fuel rail/injectors
-PCM/PCM Holder, LS1 wire harness, MAF, OBD2 plug
everything else still for sale and am going to pull out all my fittings, fuel set up, etc. and get a better inventory since there are some interested in that stuff... I need to make sure I cant use it with my new direction.... i dont think i can use the fuel pump/regulator, or those fittings that i purchased to make that work... even have ss braided lines... lots of stuff