725cc - 69# Fuel Injectors
#1
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
725cc - 69# Fuel Injectors
Category: Engine - Intake/Fuel
Price: $500
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): NC
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, Small Block, Big Block
LS Engine?: Fits LS Engine
Ratings are 69# injectors at 43.5psi
79.65# at 58psi
These injectors have the USCAR connector on them. Used these for about 2500 miles and they worked great and still work great.
if you need to go to another type, you will need to purchase the adapter wire with the proper connector for your vehicle. These can be purchased from various fuel vendors for about $50
For reference, here are the various engines and connector types:
LS1, EV1, Minitiner
LS2, EV6,USCAR
LY6, EV6, Minitimer
LS3, EV6,USCAR
LS7, EV6,USCAR
LS9, EV6,USCAR
When installing, you will want to lubricate the O-rings with a little silicone. For certain put silicone on the O-rings that go up into your fuel rail.
Last edited by ZL1Killa; 09-12-2012 at 01:36 PM. Reason: left things off
#4
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
bump for Monday.
Reduced Price $450 shipped via UPS. These are some really nice injectors, good control even on a stock ls1, works great with few bolt ons, especially 255 pump, *you would need dual 255 to make full use of these. supports up to 725+RWHP forced induction
Reduced Price $450 shipped via UPS. These are some really nice injectors, good control even on a stock ls1, works great with few bolt ons, especially 255 pump, *you would need dual 255 to make full use of these. supports up to 725+RWHP forced induction
#6
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
LS1
LS6
These are all 14mm from what I see.
ls2 will fit with no top hat (purple piece in picture)
Last edited by ZL1Killa; 09-18-2012 at 02:35 PM. Reason: ls2 wrong
#7
The lengths are different; the ID's on LS1/LS6s are supposed to come with 14mm adapters to space the length to 60mm and the LS2s come with no adapters (48mm).
Thanks for the info
Thanks for the info