98-02 F-body F1A Procharger Kit, D1SC, gauges, injectors
#1
Thread Starter
TECH Resident
iTrader: (19)
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
98-02 F-body F1A Procharger Kit, D1SC, gauges, injectors
Category: Engine - Power Adders
Price: $1234567
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MN
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
My car dynoed at 475 rwhp (8lbs of boost at 5800) on a Mustang Dyno when I bought the car with a D1SC head unit. I changed over to a SDCE spring tensioner and dynoed at 566 rwhp (10.5 lbs of boost at 5800) on a Dynojet. Since then I have swapped over to the F1A head unit.
Kit Includes:
- Procharger F1A head unit. Bought new in April 2011. Approximately 3500 miles. Currently has a 5.25” head unit pulley on it. Makes 8.5lbs of boost at 5800.
- SDCE 8-rib Spring Tensioner kit (7.25” crank pulley). Includes installation tool.
- Polished Plenum Intake
- 3.5” dual intercoolers
- All Piping and clamps for the intercooler setup. I will keep all the hardware together that I pull off to allow for reinstallation.
- Procharger intake hat with upgraded 9” filter.
- Procharger Fan setup
- Pro-flow bypass valve.
- Spare NAPA 25080545 belt. Probably will need a different size depending on which pulley you run.
- Spare (3) 6oz and (2) 4oz bottles of Procharger oil.
- PDF Copies of the Procharger installation manual and SDCE installation manual
- Radiator sheetmetal hold down
- ATI balancer
Additional items needed to get running:
- Fuel System Components (injectors and Pump)
- Crank pinning kit
- Different pulley and belt
- Tune
Payment pending on the F1A kit.
I am asking $5000 plus actual shipping charges plus 3% Paypal fees for this setup. I accept cash or Paypal. I would prefer a local pickup but will ship everything if needed. Please PM me any questions you may have. I will respond by PM, email or phone if needed.
I am willing to sell the kit minus the head unit as well. I will be willing to separate if both components sell. I would also be willing to remove the F1A head unit if both the kit and the head unit are sold. There is much more interest in the F1A so I need to find buyers for the rest of the kit. Please feel free to PM me prices.
Edit on 11/9/12:
I removed more parts tonight and did some thinking on the kit. I have had a lot of interest but most hesitation due to not including the required ATI balancer. I have decided to include this in the kit. I will also include the radiator hold down. I have also modified information about the price, shipping and fees. I can get pictures of the balancer and radiator sheetmetal hold down if interested.
Other related items for sale:
Damaged Procharger D1SC Head Unit D1SC has been sold
- Would consider selling in the Procharger kit for a lower price to the kit. Feel free to PM offers with this head unit in the kit.
- Something must have gone through the impeller blades and chewed them up. The blower still makes boost as intended. There is typically a squeal (almost sounds like a belt squeal) associated with this. I originally though some idlers and other pulleys had bearings going out before finding this. I have no idea of the extend it would take to fix the blower. I would guess it should be a simple fix but I can’t guarantee that. This would be a good option for the fix it yourself individual to get a blower.
- I am asking $800 plus shipping for this head unit. I accept cash or Paypal. I would prefer a local pickup but will ship if needed. Please PM me any questions you may have. I will respond by PM, email or phone if needed.
42lb Green Top Injectors These have been sold
- (8) 42lb green top injectors for LS1
- $175. Price includes shipping.
60lb Siemens Deka Injectors
- (8) 60lb injectors for EV1
- Bought these used injectors and never installed. I can look for the previous owner/thread if needed. Moved to a bigger build.
- $280. Price includes shipping.
Auto Meter C2 2-1/16”Electric Boost/vacuum gauge #7159
- Comes with electric sending unit.
- $125. Price includes shipping. Would consider a discounted price to combine gauges. Will ship with original box.
Auto Meter C2 2-1/16” Electric 100psi Fuel Pressure gauge #7163 This item has been sold
- Comes with electric sending unit.
- $125. Price includes shipping. Would consider a discounted price to combine gauges. Will ship with original box.
Auto Meter C2 5” Electrical tach and shift light
- $135. Price includes shipping.
AEM UEGO 30-4100 Wideband A/F Gauge This item has been sold
- Purchased in April of 2011. Approximately 3500 miles on it.
- Comes with O2 sensor.
- $125. Price includes shipping. Would consider a discounted price to combine gauges. Will ship with original box.
Speed Inc Billet Gauge Adaptors These have been sold
- Used to install 2-1/16” gauges in the Firebird Air Vents
- Have (3) available.
- Will not sell until other gauges sell.
- $20 each or $55 for all three. Prices include shipping.
All items are listed OBO. I will update with pictures later tonight or tomorrow night. I can send other pictures if necessary too. Feel free to email me @ joshshones@gmail.com or via PM here.
Thank you
Last edited by Only ERO's; 11-26-2012 at 01:13 PM.
#2
Thread Starter
TECH Resident
iTrader: (19)
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
Procharger F1A Head Unit. With the wagon wheel 5.25" pulley. Photos taken in April 2011 when head unit was brand new.
Underhood shot of Procharger equipment
Procharger installed on car
Underhood shot showing SDCE pulley
Procharger brackets
Driver's side Intercooler
SDCE Spring Tensioners
SDCE Crank Pulley
Passenger Side Intercooler
Undercar Shot of F1A
Driver's side Intercooler and BPV
Procharger Oil
NAPA Belt for Procharger setup
The D1SC Head Unit
The fun you can have with a Procharger.
Fun in the left lane
Additional requested pictures of the D1SC
Videos:
Cold Start:
In car warm start:
Outside Car idle:
In car throttle:
Under hood throttle:
Storage:
Underhood shot of Procharger equipment
Procharger installed on car
Underhood shot showing SDCE pulley
Procharger brackets
Driver's side Intercooler
SDCE Spring Tensioners
SDCE Crank Pulley
Passenger Side Intercooler
Undercar Shot of F1A
Driver's side Intercooler and BPV
Procharger Oil
NAPA Belt for Procharger setup
The D1SC Head Unit
The fun you can have with a Procharger.
Fun in the left lane
Additional requested pictures of the D1SC
Videos:
Cold Start:
In car warm start:
Outside Car idle:
In car throttle:
Under hood throttle:
Storage:
Last edited by Only ERO's; 11-03-2012 at 06:52 PM.
#3
Thread Starter
TECH Resident
iTrader: (19)
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
The 42lb injectors. Still currently mounted on the car
Pulled the injectors tonight. Here is a couple of pictures ready for shipping.
The 60lb injectors.
Gauges and Vent Rings
Tach
Pulled the injectors tonight. Here is a couple of pictures ready for shipping.
The 60lb injectors.
Gauges and Vent Rings
Tach
Last edited by Only ERO's; 11-09-2012 at 11:15 PM.
Trending Topics
#8
Thread Starter
TECH Resident
iTrader: (19)
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
I have had some interest in selling everything together. I am going to try to work with those buyers to keep everything together. If those deals fall through, I will start to part out everything.
Thank you for your interest.
Thank you for your interest.
#9
Thread Starter
TECH Resident
iTrader: (19)
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
I am still holding out on selling individual parts at this point. Still trying to sell as much combined as possible. I will start pulling parts either this weekend or early next week. I will still want to keep the Procharger kit combined, but will go through my list of interested parties in the smaller parts listed.
I looked through some vendors sites to see what some of these costs are:
Procharger kit: $6240
F1A Upgrade: $525
Polished intake: $208
SDCE Tensioner: $700
Total: $7673 for the kit that I am offering at $4800 plus shipping. There are a few components that are needed but can be found cheap.
Thank you for your interest in these components. Let's get this sold, so I have a good reason to pull it off!
I looked through some vendors sites to see what some of these costs are:
Procharger kit: $6240
F1A Upgrade: $525
Polished intake: $208
SDCE Tensioner: $700
Total: $7673 for the kit that I am offering at $4800 plus shipping. There are a few components that are needed but can be found cheap.
Thank you for your interest in these components. Let's get this sold, so I have a good reason to pull it off!
#11
Thread Starter
TECH Resident
iTrader: (19)
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
If the the rest of the kit would sell, I would be willing to sell the head unit separately. I have also had local interest in just the F1A head unit as well.
For interested parties: feel free to make offers for the Procharger kit with no head unit or also the D1SC head unit in the kit instead of the F1A. Might be able to fix the D1 cheap (I am not sure if there is damage past the fins) and get into the kit cheaper than expected.
For interested parties: feel free to make offers for the Procharger kit with no head unit or also the D1SC head unit in the kit instead of the F1A. Might be able to fix the D1 cheap (I am not sure if there is damage past the fins) and get into the kit cheaper than expected.
#13
Thread Starter
TECH Resident
iTrader: (19)
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
I have edited the first post with items that have been spoken for.
I had a couple interested parties in buying everything that was listed. That seemed like the easiest thing to do. If those fall through, I will be selling the items listed above to individual sellers. I have updated those items with This item has been spoken for.
I will probably wait until the end of the weekend to see if everything sells. At that point, I will start collecting payments and shipping products.
I had a couple interested parties in buying everything that was listed. That seemed like the easiest thing to do. If those fall through, I will be selling the items listed above to individual sellers. I have updated those items with This item has been spoken for.
I will probably wait until the end of the weekend to see if everything sells. At that point, I will start collecting payments and shipping products.
#20