4doortypels

iTrader: (39)

Category: Drivetrain
Price: $350
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): GA
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

Have an ls7 set i was was going to put into my 06 ctsv. It was not compatible with my ram slave... just had the flywheel turned, clutch from previous owner had 17000 on the clock when it was removed. Since getting it i have only resurfaced the flywheel. Looking to get my money back. 350 shipped.

4doortypels

iTrader: (39)

bumpity bump bump

4doortypels

iTrader: (39)

Pms replied to

4doortypels

iTrader: (39)

Katech billet slave spacer for an additional 50

wes8398

iTrader: (2)

Is this the OEM LS7 flywheel and clutch? Not a lightened fly, right? I'm VERY interested but don't want to mess with the slave you're offering. I was just going to go with the Vette slave from O'Riely that I know works for $90. If you have a speed bleeder, I'd be interested in that as well though.

4doortypels

iTrader: (39)

Yes all oem... slave will come with it anyways... plus you may want a spare throw out bearing... no speed bleeder. You have to by that according to the slave not car

wes8398

iTrader: (2)

Any chance you can put me in touch with the previous owner? I have some questions that you wouldn't be able to answer if you haven't ridden in the car that had this installed.
Also, what wasn't compatible with your RAM slave, and why? Why not replace the RAM you have with the OEM slave you're selling with this? I'm confused...

4doortypels

iTrader: (39)

^whats confusing, the ram slave would not fit inside of the ls7 flywheel... 400 dollar ram slave with 1500 miles (bought new) heavy duty throwout bearing thats replaceable for 40 bux, OEM slave 17000 non servicable bearing, you have to buy the whole set up, aka, youd have to bleed the clutch switch out the stainless lines for oem rubber (involves a little more time) then buy an ls7 remote bleeder for another 60 dollars, then try to take a loss on the ram if i can sell it...

and i dont have that sellers information.

wes8398

iTrader: (2)

What's confusing was that I wasn't aware of all the **** you just informed me about with the RAM slave - hence, why I inquired. Excuse me for wanting to make an informed purchase. I don't buy anything without doing my research first. If you really wanted to sell this stuff, I would think you'd be a little more accommodating with inquiries. I know I am, when I'm selling something.
Anyway, I've been waiting for a deal on an LS7 setup for a while now. A used setup wasn't really my top choice, which was why I would have liked to speak with the previous owner. Was it bought from here? eBay? Is there ANY possible way to get a hold of this guy? If not, I think I'm going to pass on the parts unfortunately.

4doortypels

iTrader: (39)

My bad^ was in a very pissy and sarcastic mood...but im keeping the set up... pulling the ram and putting the stocker back. Ive seen a hand full of ls7 set ups on ebay around the 250ish mark... good luck with your search

wes8398

iTrader: (2)

No worries man. I'm in no hurry, so I'll keep my eyes peeled and jump on one when the right deal pops up.

NOLAG05

Still have this? Is this all the parts i need to put in my car?

NOLAG05

hello? still selling this unit?