FS/FT (4) 18x9.5" Polished C5 Z06 Wheels w/tires
#1
12 Second Club
Thread Starter
iTrader: (9)
Join Date: Jan 2006
Location: Rochester, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
FS/FT (4) 18x9.5" Polished C5 Z06 Wheels w/tires
Category: Wheels & Tires
Price: $350
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): NY
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
The good: The wheels are in perfect structural shape, no bending/rash of scrapes. They come with tires. All 4 center caps will come with the wheels and are chrome with the C5 flags on them and I have some lug nuts you can have with them as well.
The not so good: These wheels came on the car pictured when I bought it and while the previous owner was trying to sell it he had a detailer doll up the car and in his infinite wisdom he sprayed acid on the wheels which caused them to haze so they will need to be polished back to life or painted/chromed. I did start polishing 2 of them and they came back decently but will need more elbow grease to get them to really shine.
Also one tire is worn down to the cords due to a bad alignment (shown in first tire picture below). The other 3 tires are pretty low but would be driveable for a while longer (but would not pass inspection)
I think I have these priced accordingly but feel free to shoot me some offers, I would consider trades either full or patrial for a gauge pillar pod for 4th gen camaro, wide band o2 gauge kit, LS6 intake manifold or aftermarket intake manifold of any brand, a double din bezel for 4th gen camaro, cylinder heads or cash.
Last but not least, these are located in Albion, NY and I can deliver or meet free of charge within 1 hour of Rochester/Albion NY and delivery can be arranged for an extra fee past that if need be but I do not want to ship these at the moment.
Thanks,
Matt
#3
12 Second Club
Thread Starter
iTrader: (9)
Join Date: Jan 2006
Location: Rochester, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
At the moment I can't ship them but I will do some looking around at how much it would cost to ship them if I do decide to go that route, thank you for the interest.
#5
I'm very interested. I'm in syracuse Ny and could meet halfway on the thruway. How bad is this Acid haze? Really want a chrome finish but not looking to pay to have them rechromed.
#6
12 Second Club
Thread Starter
iTrader: (9)
Join Date: Jan 2006
Location: Rochester, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Two of them are still pretty hazed, the ones in the side picture of the car. The other two I spent an hour polishing with mothers Polish and I powerball wheel and they came back to a nice polished finish on all the flat surfaces but will take some elbow grease to get the corners shined up. If you had a day to spend and good wheel polish I am confident you could get them looking really really shiny.
Trending Topics
#9
12 Second Club
Thread Starter
iTrader: (9)
Join Date: Jan 2006
Location: Rochester, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
These are fbody offset Wheels. I didn't run spacers on these and didn't have any rubbing issues. I don't have a way of dismounting the tires right now so for now I would like to keep them all together.
#11
12 Second Club
Thread Starter
iTrader: (9)
Join Date: Jan 2006
Location: Rochester, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
These would indeed be great for powdercoating, I will keep everyone posted if I decide to ship but for now bump for some localish New Yorkers, Pennsylvanians and Ohio.....ers? haha